Search results for query: *

  1. 1

    Interior sale

    Does anyone know of any upcoming sales for interior items: seat covers, carpet, buns, headliner? Thanks, Ken
  2. 1

    Wire harness cloth loom

    I am building a new rear (trunk) wiring harness for my ’64 Barracuda. The wires are presently in a cloth loom. Does anyone know of a source for the cloth loom? I have been unable to find one that looks like what I have now. Could it possibly be what is called an asphalt coated loom? But there is...
  3. 1

    E-brake and speedo grommets

    I have purchase new correct grommets for my ’64 Barracuda E-brake cable and speedometer cable. The end fittings on both are considerably larger than the hole in the grommet. Has anyone installed these grommets or has advice on installing them. Photos attached. Thanks, Ken
  4. 1

    '64 '65 Barracuda directional lamp question

    Is the lamp socket separable from the housing on a '64 '65 Barracuda front lamp assembly? If separable does anyone sell or have the socket assembly (socket and pigtail)? Thanks, Ken
  5. 1

    Parking brake cable

    Replacing the parking brake cable on my '64 Barracuda. The old cable is broken off just behind the cross member supporting the transmission. I need to replace the entire cable. The cable sheath is throughly rusted to the cross member. Does anyone have experience or advise in removing the brake...
  6. 1

    [WANTED] '65 Valiant fenders

    Looking for both right and left front fenders for a '65 Valiant. Thanks, Ken
  7. 1

    Cross reference

    Does anyone have or know of a cross reference for Mopar hardware? I'm looking for a list of Mopar 6 or 7 digit part numbers converted to common hardware descriptions. Examples: 446363 = 3/8" Type A flat washer 9421589 = 1/4-20 Pan head screw Thanks, Ken
  8. 1

    Interior parts vendor sale

    Getting ready to buy carpet, seat upholstery and buns for my ’64 Barracuda. ACC and Legendary. Does any vendor have a sale going on now? Or do you know of an upcoming sale? Thanks, Ken
  9. 1

    Part identification needed

    I am in the process of repairing/rebuilding the wiring harnesses on my ’64 Barracuda. Need help identifying this part. It is part of the body wiring harness (wiring in the trunk) and is located just forward of the jack. It appears to be molded over the wires and is part of the wiring loom. What...
  10. 1

    Charging circuit, 1964 Barracuda

    Still doing some planning for rebuilding my engine compartment wiring harness. It seems that the weak spot in the wiring is taking the full current through the bulkhead fitting to the ammeter. I plan on using headlight relays to cut down on some of the current. The wiring “killer” appears to be...
  11. 1

    Is this wiring correct?

    Working on my '64 Barracuda wiring. In checking old threads I have found conflicting information (don't figure) concerning wiring up a dual field alternator, an electronic voltage regulator and an electronic ignition kit. I believe that the attached sketch shows the correct wiring. Could any of...
  12. 1

    Terminal source

    Rebuilding the dash wiring harnesses on my ’64 Barracuda. Am looking for a part number, description, and source for the female terminals in the printed circuit board female connector (P/N 2258651). The actual female terminals are 5/8” long and fit over 3/32” diameter pins. Also looking for a...
  13. 1

    '64 wiring harness

    I am considering building (rebuilding) an engine & forward wiring harness for my ’64 Barracuda. Electronic voltage regulator (3438150), Electronic ignition kit (P3690426) and mid ‘70s square back dual field alternator. Questions: Are there any downsides of increasing the wire sizes in the...
  14. 1

    Bucket seat part

    This part fell on the ground as I was disassembling the bucket seats on my '64 Barracuda. What is it and where does it go? Any help will be greatly appreciated.
  15. 1

    360 Oil Filter Adapter Plate

    I have a '74 360 and am using a 90* oil filter adapter. I don't believe that I need or can use the oil filter adapter plate. I need a conformation from FABO gurus.
  16. 1

    360 Pulleys

    I would like some advice from FABO members. I’m finishing up the final assembly of a ’74 360 which will go into my ’64 Barracuda. Of course, I can’t find the water pump pulley. The original engine had PS and AC, neither of which I am going to use. The existing alternator pulley has 2 grooves...
  17. 1

    VintageGlass.com

    I would like to give a thumbs up to VintageGlass.com. Needed a windshield for my '64 Barracuda. I wanted non-tinted. Found several other vendors that only had them with a tint or the dark blue strip. Vintage could supply all three styles. Had it quoted and I sent an email ordering it on April 30...
  18. 1

    360 gasket questions

    Attached pic is of some engine gaskets that I can not identify. Engine is a '74 360. Gaskets are from a McCord gasket set 95-3038. I don't know if I don't need them for that year or what? Thanks in advance.
  19. 1

    Vintage Glass .com

    Has anyone dealt with Vintageglass.com?
  20. 1

    '64 Barracuda rear seat hold downs

    Does anyone have the location of the rear seat hold down brackets for a ’64 Barracuda? Mine were removed when the floor pans were replaced. Thanks in advance.
  21. 1

    [Found!] Windshield '64 Barracuda

    Looking for a non-tinted windshield for a '64 Barracuda. '63 to '66 Barracuda, Valiant and Dart will work. Ideally can be picked up anywhere between Cleveland and Florida, via I-77, I-95 and I-75.
  22. 1

    Engine electrical questions

    Trying to finish up the electrics for my ’64 Barracuda. Using a ‘74 360, 0.030 over, 9.0:1, mild cam, Offenhauser dual plane, 650 Holley dual pumper, 833A four speed, Spitfire headers, Mopar P3690426 electronic ignition kit. Street driver. Not a race car. I don’t want to go overboard with exotic...
  23. 1

    [Found!] ’64 Barracuda rear License plate light

    Need the entire assembly including the pigtail to the wiring harness. Not sure what years/models will work. Will be at the Nats on Saturday (8/13) for pick-up if convenient.
  24. 1

    [Found!] ’64 Barracuda front door locks

    Will need with keys. ’61 through ’65 Valiant, Dart and Barracuda will fit. Not ’66. Please indicate the donor. Will be at the Nats on Saturday (8/13) for pick-up if convenient.
  25. 1

    [WANTED] ’64 Barracuda front bumper stabilizer

    Front bumper stabilizer (Z shaped spacer between the bumper and the body) with hardware. Some ’64, and ’65 Valiant, Dart and Barracuda parts may fit. But not all. Please indicate the donor. Will be at the Nats on Saturday (8/13) for pick-up if convenient.
  26. 1

    [Found!] ’64 Barracuda antenna

    Some ’62, ’63, ’64, and ’65 Valiant, Dart and Barracuda parts may fit. But not all. Please indicate the donor. Will be at the Nats on Saturday (8/13) for pick-up if convenient.
  27. 1

    [Found!] ’64 Barracuda rear splash shields

    These are located behind the front tires. Some ’63, ’64, ’65 and ’66 Valiant, Dart and Barracuda parts may fit. But not all. Please indicate the donor. Will be at the Nats on Saturday (8/13) for pick-up if convenient.
  28. 1

    [WANTED] Seatbelt bolts

    Looking for seatbelt bolts for my '64 Barracuda. Front and I am adding rear belts. I believe that I will need C-11 bolts. All (8) connections will be singles. I have been unable to find a source for new bolts. Does anyone here at FABO have a lead for a supplier? Or does anyone out there have (8)...
  29. 1

    Seatbelt bolts

    Looking for seatbelt bolts for my '64 Barracuda. Front and I am adding rear belts. I believe that I will need C-11 bolts. All (8) connections will be singles. I have been unable to find a source for new bolts. Does anyone here at FABO have a lead for a supplier? Or does anyone out there have...
  30. 1

    Rear seatbelt location

    I would like to install (2) rear seatbelts in my ’64 Barracuda. I’m looking for information as to where the anchors should be located. I found an article written in 2003 by Neil Brommell and published on The Early Valiant and Barracuda Club website. Although informative, it did not provide...
Back
Top