Calsdart
Well-Known Member
Does anyone know who sells the k frame to install a 426 hemi in a 68 Dart
ThanksFor a factory K, these guys have the mounts....can probably build you a K if you want one
SS and AFX
link to mounts
Products - SS and AFX
if you want a coil over / rack and pinion conversion. (I did not think that is what you were asking for)
www.moparsuspension.com
Does anyone know who sells the k frame to install a 426 hemi in a 68 Dart
If you plan on using the TTI headers, make sure whatever stock kframe setup puts the centerline of the crank exactly per TTI instructions.
If your buying a already made/welded kframe, contact TTI first to check if they've heard of fitment issure with the particular provider/seller.
Who and where, is Krammer?Krammer makes them also
Al is a great guy. I picked mine up a couple of months ago also.Al Debevic in Greenwood WI has my k frame and is modifying it for my 426 hemi transplant going into my 68 Dart Clone. I should have it back in a couple of weeks.
You are dead on regarding this......very little.....almost zero, wiggle room. Motor is purposely close (1-1/4 ") to the firewall and headers around steering box allow no forward adjustment to the motor.
You are dead on regarding this......very little.....almost zero, wiggle room. Motor is purposely close (1-1/4 ") to the firewall and headers around steering box allow no forward adjustment to the motor.
I second Al's work Top notch!Jim Kramer runs Kramers. His company can be found in a Google search. Al Debevic from Greenwood WI also modifies k frames for a body hemi transplants. Have fun with your money gun!
If you’re building a Dart I have the wheel well templates as well.Sorry all out there for kicking an old thread back to life. Does anyone have proper website info for Kramers? I’m restarting my HEMI project after a long hiatus. I want to do a proper S/S mount system, SS&AFX no longer offers parts for this. I DO NOT wish to use elephant ears, bin there dun dat in high school. Thank you in advance.
Why? Can't just disagree, what did he do to you?Al Debevic is THE MAN!
I have made these for my project.Sorry all out there for kicking an old thread back to life. Does anyone have proper website info for Kramers? I’m restarting my HEMI project after a long hiatus. I want to do a proper S/S mount system, SS&AFX no longer offers parts for this. I DO NOT wish to use elephant ears, bin there dun dat in high school. Thank you in advance.