Hiya,
As the title says, i'm looking for someone that does very good work on replacement panels within 100 or so miles of Manchester NH. Car is a '70 340 Swinger originally from NM, not a North East rust bucket but needs a trunk floor pan (bad lid gasket so the pan is pitted and pin holed from the inside-out) and lower quarter/wheel house joint area on the right side from a low quality collision repair maybe 30 odd years ago. The car has been in storage for 19 years and is currently a rolling chassis so I can't drive it around for inspection.
Thanks in advance,
Tom
As the title says, i'm looking for someone that does very good work on replacement panels within 100 or so miles of Manchester NH. Car is a '70 340 Swinger originally from NM, not a North East rust bucket but needs a trunk floor pan (bad lid gasket so the pan is pitted and pin holed from the inside-out) and lower quarter/wheel house joint area on the right side from a low quality collision repair maybe 30 odd years ago. The car has been in storage for 19 years and is currently a rolling chassis so I can't drive it around for inspection.
Thanks in advance,
Tom