screeminDemon
Well-Known Member
Here is a pic of the flywheel I just had drilled for balance for my new 360. I believe it was a 318 flywheel and I measured and marked the places to drill based on a spec sheet I got online. Machine shop drilled the holes I marked for $25. Obviously its not perfect, but I'm hoping the balance will be close enough so as not to vibrate my engine.
I just converted my slant six, 3-spd demon to a 360, 4-spd.
I just converted my slant six, 3-spd demon to a 360, 4-spd.