"1970 Pro Touring Dart Build"

-
Test fit some 315 35R17's on the Dart since the mini tub is almost done.

Decided to step it up finally and pulled out the good camera.
Steam-Roller.jpg


Steam-Roller2.jpg
 
That lift has removed so many head aches and made it easier to work on it. Well it adds a head ache every once in a while when i forget where the arms are. :)
 
My new desktop wallpaper.

I'm tickled pink about getting the mini tubs done. LOTS of work but it sure paid off.
Steam-Roller3.jpg
 
My goal is to modify the 4-link on my dart a little to get it about that low. Very nice. What kind of camera is that? I have to get one.
 
Looking great , by the stance there it looks like your going for the super slammer option too.
 
Badart: I use an old Canon XTI when i remember to take it with me. Otherwise all the pictures are taken with my Motorola Razr Maxx.

As far as the super slammer. I'm afraid I won't be able to get the ride height I want without a 4 link in the rear and some surgery like you did up front.
I guess there is always lowering blocks I could use in the rear. Waiting to hear what Denny has to say on my measurements.

Hood will start getting welded tomorrow.
2012-04-06_19-59-20_819.jpg
 
AnotherA said:
Badart: I use an old Canon XTI when i remember to take it with me. Otherwise all the pictures are taken with my Motorola Razr Maxx.

As far as the super slammer. I'm afraid I won't be able to get the ride height I want without a 4 link in the rear and some surgery like you did up front.
I guess there is always lowering blocks I could use in the rear. Waiting to hear what Denny has to say on my measurements.

Hood will start getting welded tomorrow.
2012-04-06_19-59-20_819.jpg
Click to expand...

sorry I missed your call...went to the All Star (1/2 mile dirt track) show at Attica,Ohio tonight...special appearance tonight along with the All Stars regulars....Tony Stewart and Casey Kane (they got lapped)...and my 20 year old nephew

I'll give you a call tomorrow
 
No problem. I missed your call because I couldn't hear it over the air compressor. Sounds like a good time at the track!
 
Spot welded teaser.

I present to you the first ever Cuda hood on a Dart.

Red paint was to help the scoop area of the hood stand out.
spot-welded.jpg


You'll get better pictures when everything is the same primer color. Its pretty distracting right now with the calico look its got going on.
 
I'm digging it .....one request though...work faster and post more pics, no big deal right. :thumblef:
 
76orangewagon said:
I'm digging it .....one request though...work faster and post more pics, no big deal right. :thumblef:
Click to expand...

I wish I could work faster so I could do just that.
But there is only so much NOS I can run my body on before I throw a rod. :D

GetImage.aspx
 
Mad Dart said:
The hood looks sweet. Can you get a couple more pictures of the hood form different angles??
Click to expand...

Check your pm.
I wont post any good shots until its all one color and welded up.
Its such a jumbled mess of color right now its hard to see the hood as a whole.
 
Now how did that get there?

2012-04-25_22-17-47_668.jpg


I will post pictures that I took with my good camera when I get some time to go through them.
 
Trunk floor pan is partially welded in. That should get finished up this weekend with a few other things.

Trunk-pan-partial-weld.jpg


Mini tub.
IMG_9655.jpg
 
Damn I thought I was gonna be the first to have one. What's with the disclaimer sticker ?
 
You got it. That's a Denny K.



Ross, its just a cya. It will come off before I get it powder coated.
disclaimer.jpg





You were the first to have one. Unless what you mocked up was a K member made of legos. :)
 
You must log in or register to reply here.
-

Back
Top