Hi anyone out there that has power steering on a 67 Dart with the factory 6 cyl K frame. Car has a 1968 383 engine b body 383 manifold on right side Chrysler C body manifold on drivers side and Schumaker motor mounts.
Or some other combination please let me know what worked for you or how...
Hi I tried to sign up twice both times it stated my e mail address or name was already used some how I don't think that would be possible.
Blair Harris
Hi i new the Idler arm was mounter diffrently and thought it would be ok. I have an after market steering column with a diffrent coupler so i think i can just use it or an adaptor if mine wont work.
Thank for the advice
Blair
Hi i have a 67 Dart with a 383 mounted in a 6 k frame now manual box. Want to change to power box off a 68 to 76 A body to my 67. Have always been told 67 had a diffrent spline or pitman arm was diffrent. What kind of issues will i get into changeing the power box off a 1970 A body ??
Hi i am looking at buying from Bergman in NY a power steering kit for a 1967 Dodge Dart with a 383. They seem to think that all A body 72 and earlier had a 1.125 diameter spline pitman shaft. I was always told the 1967 was a seperate year and diffrent style than 68 to 76.
Can anyone confirm...
Hi thanks for your reply, do you have a manufacturer name and a part # for the branch resonators. Also what is the smart phone app called ?
Thanks Blair
Hi i have a crown gear part # out of a 1972 Charger 9 1/4 rear end. I would like to know what the gear ratio is part # 2852928-271 date coded 2-10-72. Normally in my expeience the ratio is part of the code number. Does anyone have a crown gear casting number decoder?
Thanks
Blair
Hi thanks for the advice,i did put the cross over pipe on and it slightly reduced the noise still a huge problem. So i will be taking your suggestions and looking into the Walkers seems like the quickest fix.
Hi i have a 1967 Dart GT 383 with manifolds 2 1/2 dual exhaust front to rear flowmaster mufflers. At about 1600 rpm i start to get a high pitch sound and it increases to about 2400 rpm. To a point you cant hear the radio it drop of almost completely at 2500rpm. I have done some research and a...
Hi after reading you replies i will give a bit more information. Keeping in mind everything worked finetill i changed the carpets on a console shift car with factory air (so extra work tighter fit)
When you pull the head light switch both front & rear parking lights & the head lights work.The...
Yes the four way flashers work as long as i dont push down on the break pedal then both the front flashers will bot stay on till i release it.
Thanks to both of your suggestions i will look tonight and let you know what i found.
Hi looking for some advice.
l just changed the carpets and when i was done had no signal lights . Also nototiced when i push down the brake pedal the both front signal lights come on and stay on till i release the brake pedal. Thought i must have put a screw through a wire when i put the sill...