Recent content by Dart swinger 73

I must sell my 73 Dart. It runs and a lot more.

Hi guys Been a long long time. I have a couple of questions about the wiring on my 73Dart. Could not find a good electrician worth his salt. Two previous guys took me for a ride I gave each a new harness and they couldn't get it finished. So. I ripped all the wiring out and started all over...

I do have pictures in my manual. My rear end came out of a 69 Charger, I think. There is no blown up pictures. Anyway. Your picture names all the parts. The part I have left over is The parking brake lever. Now I see how it's installed.It connects to the back of brake shoe and that is where the...

I got a junk yard 8-1/4" rear end. Didn't have brake shoes and springs. My manuals don't have a exploded picture. If someone out there knows where I can get one to finish this job would be great. I did start installing the right side. I have 1 part left over. That's why I need the blown up...

It's a Ron Francis Bear Bones

Hi guys its been awhile. Still working on my Dart. She's almost ready. Trouble with turn signals.

HI it's been awhile. I'm still working on my Dart. I getting my a$$ kicked with the electrical. Does anyone out there know how to bench test my dash gauge cluster. It was working for awhile then it stopped. I just need the lights. I have after market gauges in the consol. I did rewire the...

Hi Im back. Dart is ready for paint. Dash is togather wipers work Dash light work. Blower motor works when the switch is turned on. Backed her out the other day and drove her around the complex. She turns left, right, forward, reverce, stop, go. Hope next week I can get her in the paint shop...

You have to disconnect the wiper motor from the firewall. and run. groun to green wire. apply power to brown. motor runs. To park. Disconnect ground from green.. connect green to brown. then connect red to ground. Connect power to blue. Motor will park. Once it is in park it will work right. I...

Can anyone tell me how to bench test a 3 speed wiper switch. I tested the motor. It's working fine. I have power from the fuse pannell. Tomorrow I'll power up the 4 wires with jumpers and make sure I have power through the firewall. But, if someone could PM me on the switch test tonight. It...

Hi Guy's I removed the complete stock wiring harness. Replaced it with Ron France "Bare Bones" harness. I had already bought a new stock heater harness. Anybody know where to connect these wire's.:coffee2:

Re-doing the wires on my 73 Dart. This is the curcuit board drewing of my plug. I need help please let me know if I have it right. I have a drewing of a Rally plug that explanes each colored wire. Rally cluster is different, from my dash harness standed cluster. Do I have this correct???

My dart came with a 3 speed motor. I have a 2 speed installed now. I was told it would work. I want the original 3 speed motor with the motor against the fire wall. Then with the oscilation of the motor drive are and the 2" connection bar. Maybe that will work. Nothing was connected under the...

Just preview of the seats

I'm tired of dealing with the old wires under the dash. I bought a system from Ron Francis. I took the dash out of the car. The wiring under will be run nice and neat. I wish I did this when I rebuilt my 78 Vette. Who knows maybe for it's 10 anniversary of it's last paint job. There's a few...