Recent content by eds70dart

Has anyone have lying around in their piles of parts the bottom half of a 1970 Dart Swinger front split bench seat. I need a good frame and springs. Don't need the back upright portions and I don't care about the padding or the covering as I plan to repaint and recover. Mine is damaged and is...

Hey guys, This old fart (eds70dart) will be there Saturday at the Moparfest, but on foot like the last 10 or so years. Probably have seen some of you guys in past shows, and didn't know you guys were members of this site, so I would like to meet some of you guys and see your cars instead of...

Yes I would be interested in the product also.

Sorry I didn't get back to you. I'm having problems getting pictures onto the web site on this matter. But I did by chance find the old part number for the plugs in an old Chrysler parts book and they are still available for about 2-3 bucks apiece. I ordered so I'm going to replace them all. I...

Need some advice here and wether to act on it. Re-doing my rear drum brakes and replacing them with all new stuff. I was cleaning all the rust off my rear back plates, I noticed two oblong holes at the bottom of the back plates. They are behind the adjuster screw assy. and in between the brake...

I have a 70 Dart Swinger, 340-4 speed car. The fronts are disc and rears are drums. The problem is I need a new set of rear drums and don't have the originals to get any measurements off of them to replace them on the back end. Any Dart owners out there that have purchased any new ones. Also can...

Maybe I didn't elaborate enough sorry. The front wheels or front end are on the ramp style supports. I have jack stands supporting the rear end of the car on the frame just in front of the springs where it's bolted to the car. I was trying to get the car up level with the rear part of the car...

This might sound a little stupid, but I rather be safe than sorry. I figure there have been others out there that have done this and know the in's and out's of it. I received my car back all painted on the underside and top side and while looking it over in my driveway I noticed that the rear...

Would like to know if anyone has had this problem and how to solve it. Put new clips and screws in, had the windshield put in professionally, and was putting the chrome pieces back on, when one of the screws holding the clips on the lower passenger side busted off. I don't know if it was a...

Can someone direct me here or give me some ideas. I know in the past there has been some posts on polishing tail-lite lenses, but just can't find them when you want to. I don't want to spend big bucks here on polishing kits, as the car is not a show car but a well restored driver. All these...

Thank-you very much for the info..

Looking at the expanded view of the Z-bar, I've got a question for my own info. I noticed that the spring is on top in the picture. Does it matter if its on top or the bottom, and what is the real purpose of it. I have an idea but would like to get the right answer from the pros.

Thank-you very much guys. If I ever get to see you guys, I owe you a beer or two. My cousin just lost out and owes me a case of 24....YEH>

Just need advice on the right way of doing it. I'm putting my 70 Dart 340 back together and my family member and I have a difference of opinion. There are two or three of these clips that are used on the Z-bar and the clutch rod assy. It doesn't show how these things are put on in the manuals...

Some of my friends have told me the driver side would be a b&#$ to put in but it went in a total of 5 minutes as the steering column is out of the car. We moved or pushed the motor over to get the driver side in with no problems. But the passenger side is the problem. We can't push or get the...