Recent content by jacksdodges

need a intake with or without carbs for a 1958 poly 318.

I plan on going to the mopar nats this year for my last time. My question is can I rent a golf cart in advance? I am just to old to walk it all again. thanks

Go to a hardware store and buy one of those chrome metal lines that go up to the tank on the commode. you can make three out of one pipe. get three long carage head bolts. works great and looks great.

Well I have done all the things I have been told to try and I guess I just got a weak cyl. Did the leak down test today and it didn't leak down, put a camera in the cyl. couldn't see anything, took the rad. cap off with motor warmed up did the leak down test no bubbles in rad. plus it didn't...

My stroke is 4 inch, my bore is .40 making it 418 .

I was checking the compression on my stroked 340 and here are the mumbers 1/200,2/200,3/190,4/205,5/150,6/185,7/190,8/185. we checked this with two gauges. and came up same. I have adj. hyd.roller rockers if that matters. This is not a new motor and runs pretty good. I am not running high...

Thanks guys. I just went out and checked for oil in the motor. The dipstick is clean, the only evidence any water in the motor the valve cover breather above the #1 cylinder had a little muckie on it. the rest were all clean. unlike the last time I checked. last time it was the breather over...

Its just a little maybe a paint or quart after you drive it a lot like 50 miles. Its not on my dipstick, just on the front pass. side breather. It was doing the same thing and I pulled the intake and it looked like it was leaking on the front water passage pass. side. I have about 30000 miles...

I am losing water somewhere in my motor. I am running a 340 stroker and I am getting water in my oil, I pulled the intake to put another one on and though it was leaking at the front corner, Though I fixed that. I am still getting water in the motor. Is there someway I can check and see where...

Just got back from the power tour. We had a blast. Only problem there wernt many MOPARS on the tour. Saw one badass 65 dart in Memphis. We went from little rock to Madison Wes. then back to Memphis then we came home. I saw enough chev. to last awhile. In Memphis we saw a YUGO with a 426 Hemi in...

I happen to own a Shelby Dakota, Bought it new and love it. If you have never owned one then you don't what your talking about. I would ten times rather own my Shelby than your car. I am not calling your car a piece. I just don't like it. Its just another dart. Mine runs great and to me looks...

I have a 360 crate motor with about 2000 miles on it. Totaled the truck , Now my question is how to store it till I find another ride. It may take awhile. It will still be in the truck.

I ran one for years. I also broke a couple before I figured out not to speed shift. There great for cruising or going on trips. Its good for showing off making burnouts because low gear is so low. JUST DONT SPEED SHIFT.

I saw one 6.4 on a truck badge.

Got a question. What is the biggest Hemi built presently? :wack: