Recent content by logger 73

Where do I find one?

Is there a unit that has the coil as a combined unit like the GM HEI?

Thanks...where would I find a wiring diagram to put factory in a 67 Cuda?

What does the MSD box actually do?

Street use mild 360...should I use factory electronic distributor or aftermarket?

Searching EVERYWHERE for complete front fenders for 67 Cuda. Everywhere I look only has fender patch kits. Also need pass splash guard inside fender that covers door hinges. ANY help is appreciated

Haven't had heads in shop yet...and thinking bout what you say bout parts to replace they do add up QUICK..when I bore it should I go with dome pistons also? Bout same cost for stock as domes from kuts I've seen

Able to get away with using stock 360 heads & domed pistons to get compression up? Since boring it anyway

Was figuring boring it, cam, intake, carb, hedders, and valve job...want to try to use factory heads...not going to race it but don't want a slug either...auto trans Looking at idle-5500 RPM range of use

360 2bbl out of 76 RV, budget build ideas for street use?

Shifts like an old power glide...slips in R and only 2 forward gears...maybe a forward gear blown?

What trans is this? Behind a 273. Also will a late 70's 360 work with it?

Thanks for the info

I need trunk bottom/spare well anyway so that will work well...is that 1 piece or multiple?

Ok...do you have to adjust them often if primarily street cruising?