Recent content by Mtrhed

PM sent.

So, that would be a “No” on the computer! Understood. Shoot me your number when you can. It sounds like between you and eBay I could almost piece together a complete setup except for the backing plates. I’d still prefer to start with dirty stuff so I can see how things are supposed to go...

Bummer! I really appreciate you checking for me. The last time I bought these the first two set of 11”x 3” I went to see ended up being 11” X 2.5”. The 2.5’s would still be a good set-up but I started playing Tuba in 3rd grade and the go-big-or-stay-home thing with me never went away...

Cool, do you have a website? I’d like to find a complete-n-dirty set and refurbish them. I’m very much a monkey see / monkey do kind of guy. I have a few leads on components but will need to buy new part before long.

Cool, i’m Newish to Mopars, most of my “hoard” was Ford stuff. let me know if you can about width. I found someone from the C Body site that has a set who might be a bit closer, (less freight). He is checking on cables. If the deal falls through with him and if you can verify the width of your...

Thanks! The last set of these brakes I purchased came from a ‘68 300 as well! Good idea about trying the other MOPAR sites. Since I’m already member here I figured this would be a good place to start.

Hi everyone, I’m about to start in on a truck Dana 60 to narrow and set up for my ‘68 Dart. I’d like to add a set of 11” X 3” drum brakes to this. Is anyone parting out a late 60’s early 70’s fullsize that might have these. I’d like the whole mess, chicken, guts, feathers, and garters. Any help...

Opps, butterfingers, Max Wedge II's number is 77949.

I believe the numbers for the Victor Jr heads are as follows: 77929 - standard port with valves 78949 - Max Wedge II's with valves Prices for both seem to run the same, about $890 per head on eBay. My car: '68 2 Dr post 440 reported to be built be reputable local shop/owner who ended up...

My plan has always been to use a single 4 bbl. But since my car is a plain-jane by design, having a cross-ram stitting there when I pop the hood might be worth loosing a few tenths at the track. Too bad they're so expensive. An STR would be the next best thing.

Thanks for the input guys. I'm considering a set of the Edelbrock Max Wedge II's but I think they're really overkill for my app. Still, I'd hate to leave something on the table by getting the wrong heads. I kill for one of those repop Max Wedge crossrams. I could probably get girls with one of...

Hello everyone, I'm in the market for a set of heads and am considering the Edelbrock Victor Jr. Max Wedge II's. The available intakes for these seems pretty limited. I was curious if anyone has ported a standard port intake to make it work with the raised ports of the Max Wedge? I realize...

PM sent

Hello all, I'm still mulling over what to replace the stock ignition system on my car with ('68 post car with a mild-ish 440). I've considered the $55 eBay special distributors but whenever I ask about replacement parts everyone gets really quite. I've considered buying a reman OE...

Makes sense, thanks for the reply.