Recent content by MY340

  1. M

    sunroof drain tube help!!

    I drilled small holes under the car for the hoses to exit. Same with the rear hoses.
  2. M

    Dynomax Ultraflow mufflers..

    I hated my new Flowmaster exhaust so much I tore it off my 1973 SpaceDuster 340-4psd with MP 508 cam and made my own setup. Ran 3" headpipes from the Hedman headers with an H-pipe then reduced down to 2.5" Ultraflows and finished it off with 2.5" Accurate LTD tailpipes and factory style SS tips...
  3. M

    Thermoquad on Air Gap

    I ran a thermoquad on my Performer RPM manifold with the 1" adaptor but I opened up the hood and installed the dual snorkle scoop. Doing this will give you more air cleaner options. I ran a 10 x 3 K&N extreme filter but with alittle more opening you could go 11" diameter. You'll also have to...
  4. M

    TQ home-brewed choke setups

    I ran a chokeless 850cfm TQ with a Performer RPM manifold & adaptor on my 73 Duster340-4spd combo without much issue. On cold weather starts I just pumped the hell out of it or poured alittle gas down the carb prior to starting. With a 4spd you can feather it till it wants to idle good. Warm...
  5. M

    Action+Plus vs Stealth

    I ran a Stealth manifold, 1" 4 hole spacer and a 750cfm Edelbrock on my 70 Duster 360 and it ran very well. The 750 cfm Eddy isn't great for gas mileage but performance was excellent.
  6. M

    508 or 509 Purple Shaft cam

    I'd say it's a very rough & mean sounding idle. :D Ran the MP508 in my 340-4psd-4.10 SpaceDuster.
  7. M

    Sub-frame connectors

    Had mine installed on a drive on rack which I've heard is the best way. I made my own connectors then had the mufflers shop weld them in.
  8. M

    What carbs are you guys running on your 360's

    I ran a #1407 Edelbrock 750 with a 1" 4hole spacer on my built 360 and it performed flawlessly with excellent throttle response.
  9. M

    Let's see your Duster/Demon paint schemes!

    Here's a color scheme not to often seen. Basin Street Blue (TB3) with white stripes & white interior with medium blue accents & carpet.
  10. M

    Sunroof panel removal thread

    There was a post a few days ago about how to remove the sunroof panel in an A-body. I finally remembered how I worked on mine when I owned it. Close the sunroof about all the way but leave room to get your fingers in it. Remove the barbed trim buttons that secure the inner cover panel to the...
  11. M

    american eagle radiator ae2375

    I had a 22" two row with 1" tubes in my 70 Duster 360/auto and it cooled great even on 95 degree days. American Eagle $159 plus shipping last year. Heckuva Ebay deal.
  12. M

    cat wiskers

    The Metro moulding ones I got off Ebaymotors for my 1970 Duster fit perfect and were just like original. I think I got some for my 1973 Duster from Year One and wasn't real happy with them either. Can't remember who the supplier was on the YO whiskers but they had the same fitments issues.
  13. M

    Is this bench seat correct for a 73 Duster?

    http://www.forabodiesonly.com/mopar/vbpicgallery.php?do=big&p=3610
  14. M

    Oil viscosity - why the 20W-50 BS?

    Lighter oils like 5W-30 or 10W-30 are fine for most applications but I wouldn't recommend it for long trips in 95 degree heat on a high performance motor turning around 3000 + rpm steadily on the highway. It kinda turns to the viscosity of water from my experience. LOL!
  15. M

    Dusters and Demons

    Factory 1973 Duster 340-4spd with sunroof & fold down rear seat options. :D
Back
Top