Recent content by soulessrider

Alright so i need some help with the type of headers that would give me the most gains if any!! . The engine is back together. This is what i have.. Factory crank .030 piston over Edelbrock rpm performer heads with Rpm performer dual plane high rise intake. The cam is comp cam extreme...

Bearing are new and the crank was reground. I have .006 on the back side of the number three main.

Hey guys. I am havving issues with the crank thrust I set it at .004 but after I am done tightening the mains it goes back to .0015.. are there any tricks to this?

Yes low end torque and mid would be ideal. The current gearing in the truck is 3.23 for now.. Down the line i would like to change them to 4.10... So now I have the intake(rpm airgap) carb(avs) as per rumblefish suggestion... I have looked at so many cam's, comp cams extreme energy(XE256H) for...

Very good info!! Thanks for the info.. I don't know the cfm's for the heads but max lift is .600. How does one find that out?. The fuel will be regular since i don't want to deal with high compression and be restriced to high test fuel. As for the carb i want one that i can set and forget. I...

I need some advise/options. I have an 81 360 with .030 over pistons,stock crank,rods. With RPM heads. There are so many options out there i need help choosing the right intake,carb and cam. Keep in mind this motor will be for off road use in mud and climbing. I would like a some what lumpy...