Part # for Swinger Emblem Barrell Nuts

-
70GoMango340

70GoMango340

Active Member
Joined
May 20, 2024
Messages
28
Reaction score
18
Location
Santa Rosa, California
I need to rescure the Swinger emblems on the quarter fenders of my '70 Swinger 340. I have read previous articles that had link to the part #'s but links have expired. Does someone have the correct part number? I know it a barrell nut for a 1/8" post and 3/16" hole but I am assuming there are multiple based on thickness of the panel they are being used on. Any help would be greatly appreciated.

I did find this description but haven't found a 1/8" stud 3/16" hole #218.
 
you could use these
Screenshot 2024-08-26 at 1.06.59 PM.png


I used these on my scoop emblems

Screenshot 2024-08-26 at 1.08.24 PM.png
 
Since your a new member, let's help you out on Chrysler sheet metal terms.
Fender location is front of car and quarter panel is rear of car.
Combining the words like in quarter fender can be confusing. Just trying to help out.
The number shown in post 4 is the fender location
The quarter panel retainer is 9420263.
It was used on many Chrysler nameplates back in the early 70's.
 
townsend said:
Since your a new member, let's help you out on Chrysler sheet metal terms.
Fender location is front of car and quarter panel is rear of car.
Combining the words like in quarter fender can be confusing. Just trying to help out.
The number shown in post 4 is the fender location
The quarter panel retainer is 9420263.
It was used on many Chrysler nameplates back in the early 70's.
Click to expand...
Got it. Thank you.
 
You must log in or register to reply here.
-

Back
Top