Search results for query: *

:lol:

Driver side door latch ?

Headlights go in the front

the front bucket seat tracks are sold. The accelerator pedal and pivot mount are sold

Happy B Day Frank.

O.K., the last batch of photos with project completed. Thanks for the solid comments!

Looks wet

You are very understanding of a problem that is good and also keeps your blood pressure down

Nice!!! It’s been convoy after convoy of old cars down 65 by my house.

I think I got the pad from Just dashes out of California. Thanks

What you've experienced is IN PART (and only in part) of why there has been so much written about the ammeter circuit. There is more to it (many times) than just the ammeter. In general, the possible problems are: 1....Many times aggravated by the installation of a much larger...

Depends on the original application of the cupped washer- I know of at least 3 different depths that were used. Deepest was on the LA 318/360 roller cam engines. They were the deepest because they used a long snout cam and no fuel pump eccentric. Middle depth is a "normal" LA motor with long...

Beautiful color! I'd drive it and check the tires frequently to see if they get chewed up. If they do, as long as the wheels aren't also very close to the spring, replace the tires with something 10-20 mm smaller. Using spacers may require new longer lug studs, and will of course push the tire...

Thank you!

Those look like the stock amp wires. If so, you can connect them together, with a bolt, and nut. You can also cut them off and solder them together. What ever you do make sure you insulate them real good, as they are hot all the time your battery is connected. Disconnect the battery when...

Hey Fred. I have some questions about my 70 Cuda . Paint and body questions. Maybe I should PM ya..... @Frodee

Hey guys. The colour really comes to life out in the sun! Also, I’ve had bigger tires installed on the car and the rears only have 1/4” of clearance. Any recommendations on spacers? Thanks!

We're here

Color reference chart a member posted shows drums as semi gloss black or natural. Is there a specific reason for the difference, i.e. year, wheel, option, etc...? I have rallye wheels and would like to know what others with rallyes have for drum color.

Knowing that my outer wheel bearings on my brand new front end brakes were protected by one of these crappy looking, dented caps, i couldn’t stand it anymore and bit the bullet and bought new ones.

A decent showing of A bodies

Overdrive first, then lockup.

The 1920 was never made with brass float,1904 and some others look like 1920, had brass but not 1920.. parts are different. Filko 19-117 Carburetor Float | eBay

I have a 1975 Duster with a 440 swap engine from a motorhome. I bought an ignition conversion kit and I hooked it up with the original wire harness from the Duster- I think it had a 360 in it-there was no motor when I bought it. I tried starting it for the first time-there is no spark. When I go...

I understand the rules if you want to delete it you can

Agree and the Carter HP pump is the tops and your combo was well sorted out, congratulation!

It is going to be less because of the change from a 2.92 gear to a 3.55 gear. the car gets it's RPM quicker with the 3.55 vs the 292. The 3.55 with the OD trans is a great combination for a street/highway car.

All you need is an Emu

Ed, is that dash pad custom or available out there in the market? Great looking car.

Happy Birthday Frank. Have a beer and relax for the day.