Search results for query: *

You showed up on the radar MIA! Welcome back Kotter!!

You are a gentleman and a scholar. Thank you for all the insider information. I have learned much about gear ratios from you.

Don't pay any attention to that rigged gas line. I was trying to figure out fuel pressure. It used to be a drag car. Im experimenting with a 2:50 rear ratio and a 3:42 first in the super T10. No real traction in the car and plenty of torque so i basically get OD.

These seats are in good condition so i believe you are correct in that the foam is still not worn in. I put the studs forward effectively sliding the seat back. Ill use spacers for now, as suggested above to see if the tilt is in my favor. A little more wiring and the spacer setup will be...

Unfortunately this is so true and Incarceration tends to be not that great at rehabilitation. So if we built a big f'n prison like the one in el salvador maybe the threat of "hey, we got plenty of room, we'll leave the light on", then maybe a guy thinking he will get probation for the chance...

For all the bad press law enforcement gets (some of it is warrented), its good to see one in the win column. #ballzofsteel

I did think about getting the next door kid to do it.......then my cheap azz put on the knee pads. I know, I know.....its not what you are thinking.....don't go there now....:rofl:

wish I could "agree" and "like" this one. A few months ago I had my lower bicep strain (must of been all that working n out and gettin "swoll") and that certainly makes you work on technique to get things done. (yes, that IS what she said) :lol:

Im housing a 68 firebird for a friend for a couple years while he goes abroad. 4 speed 400 and a little ratty. I get to work the bugs out while driving it. easy stuff. overheating or rattles. The barracuda is an 6 year project and who knows how that will drive, lord knows I haven't driven it...

Dems some big azz wheels. Smart man.

I dub thee method......"The Nooner":lol:

2nd TPLO surgery. First was on the right last December, now the left. I have never had these things happen in 34 yrs of dogs. He is quite the champ and due to me learning how to train better and better, he has turned out to be quite the lad. I am only a week into the healing. I like GSD's, the...

I hate trying to get the wheel to line up to the lugs. The biggest offender is these thick azz mags and short azz wheel lugs. Ive tried putting the trouble light on the ground behind the wheel to shed some light on the subject and that works pretty good. My latest is putting white paint pen...

What ever happened to @Princess Valiant 's stab at you tube stardom. I thought she did a great job and knew more stuff than i did. I imagine it does take quite a bit of time and consistency to put out good content. I have no idea. Let's see @318willrun 's van and princess valiant do an...

Caddy. Groom gets to drive. If he ain't drunk of course.

It's a whole new world with traction.

Welcome!! We like pictures of jeeps!!

Gotta get a clutch tamer!! You boys up north should get a race going with DDs speed shop! I like that channel.

Ill pass on these @MidnightSwinger. makes more sense since you are so close. They would be backups for me if I screwed up my cuts post mini tub.

I moved the studs Ill place and shim today sometime. I need to finish up some wiring under dash first.

I am going to try the most forward holes on the tracks and put a spacer under the front two studs to 'lean back' a smidge as @Cuda Al suggested earlier. If I go down the road of fabrication, you can get some inexpensive sliders and mount them on whatever type of riser you choose. I hesitate to...

Post #6 second picture are the same as mine in post #1. Thank you for the response, may I ask if you went with the front holes? I think Ill try harder to press those puppies out........

New info. Risers are heavy duty rivet situation.... Might have to drill em out. Hmmmmmm

I like this idea. Makes sense.

Well im here to say that pressing out those mounting studs might require some heat. Or i cut em off and get another to use the hole i want. I thought these tracks were tough to find, i figured a pure hearted mopar head would have called the negotiation team by now with a few...

Hellooooooooo FABO. I did try to use search function...... just so ya know. Aformentioned 67 fastback buckets. Without carpet in car and seat placed for first time...... Im 6'2" and my head is too close to roof. If i move mounting studs forward, effectively moving seat backwards, i might...

Im in 98133. Id be interested if it makes sense.

Welcome! I have a '67 383 fastback. Ill try to answer questions when you got them. Mine came in boxes, so i have had to make up a few things on the way.

Dude! nice '8 eh?!!

A little too close to home... The dog had surgery and can't do steps so this is it for a couple weeks. Funny isn't it?