1970 Dodge Dart gas filler tube and the matching vent tube, no rust, no dents, has some paint overspray but overall in great shape. $50 +shipping from Akron, Ohio 44305. PM if interested.
1969 Plymouth Valiant grille very good condition, the bars are straight. 2 small dents in top/bottom of center, no marker lights. $75 plus shipping from Akron, Ohio 44305. PM if interested.
NOS 1970-72 Dodge Dart/ Plymouth Scamp Deck lid Molding (M88) All 3 pieces are in perfect condition. $125.00 shipping included to lower 48, P.M me or email at [email protected]. Item is located in Akron, Ohio 44305
Reconditioned 318/340/360 10.5" Small Block Bellhousing cast #3743859 originally manufactured for 75-6 A-body/1975-80 F-body/1976-80 trucks using A-833 transmissions, but will also fit B/E applications with appropriate fork pivot bracket (which is also provided in sale). This bell housing has a...
I am looking for a correct date coded 489 center section for a 8.75 rear axle (either bare housing or complete). I am trying to find one with a date code between 0201-0901(January 20,1971-March 31,1971 for my build. Will buy or trade for a complete January 12, 1970 489 with a 3.55 cone style...
NOS Hard to find 1970-72 Dodge Dart M88 Deck lid Molding Treatment. All three trim pieces are perfect unused pieces. Comes with used mounting hardware. $150.00 plus shipping from Akron, Ohio 44305. P.M me E MAIL removed by staff.
NOS Hard to find 1970-72 Dodge Dart M88 Deck lid Molding Treatment. All three trim pieces are in perfect but one of the short quarter extension has a slight screw mark on it but is unused. Comes with used hardware. $250.00 plus shipping. P.M me if interested.
I am selling a 1971 340 intake manifold 3512100 that has been sandblasted, epoxy primed and painted with Mopar Performance Hemi Orange. This intake also has had a piece of heat barrier added under the metal splash shield, which has also been replaced with a piece of .090 304 Stainless steel to...
I have a working Manual Windshield washer fluid foot pump that has been disassembled, sandblasted, painted and rebuilt. There is some pitting that is not visible once installed.
Item is located in Akron, Ohio 44305. P.M me if interested. $15.00 + shipping
I am selling a completely restored pair of Duster inner fender splash shields(the metal ones) that have been sandblasted, painted and have NEW seals from DMT (Detroit Muscle technologies). Item is located in Akron, Ohio 44305, please P.M me if interested. $ 75.00 + shipping.
...some that you only get to read about in magazines.
2017 All Mopar Show
All Mopar Show
Sunday, May 28, 2017
Summit Racing Equipment, Tallmadge, OH
* Open to all Chrysler Corporation vehicles
* Free dash plaque for all entries
* Event coverage by the Handy Randy Show
* Registration: $10 day...
I am looking for a 1971 340 Exhaust Manifold part # 3418623. My SPD is 4-30-71 and my 3418621 drivers manifold build date is March 1971 so I am looking for something close to that build date. You can P.M or Email me at [email protected]. Thanks
I am looking to buy a 1971 340 LH Exhaust manifold part number 3418621. It must be date coded before 4-30-71. This is for an E body application. Please PM me if you can help.
I am looking for a 73-75 Duster Space Saver trunk finish panel like in the attached picture.
Please P.M me if you can help. Shipping would be to Mogadore, Ohio 44260
Thank you ,
Ross Gordon
2016 All Mopar Show OH
All Mopar Car Show
Sunday, May 29, 2016
Summit Racing Equipment, Tallmadge, OH
* Open to all Chrysler Corp. vehicles
* Free dash plaque for all entries
* Event coverage by the Handy Randy Show
* Registration: $10 day of show
Alright FABO experts.......here's my dilemma, I took apart my 1973 Duster 5 years ago and have rebuilt all the door glass mechanism parts (regulators, glass tracks, rollers...ect) and now that it's time to put all back together I can't remember which way the track that bolts to the glass goes. I...
I'm am looking for a passenger side(Right hand) door catch assembly for my 1973 Duster. Please P.M me with cost, shipping and payment method accepted(Paypal,ect...). Shipping location Akron, Ohio 44305. Thanks in advance
Photo for reference only, not off a 1973.
...is interested in going this year....
2015 All Mopar Show
All Mopar Show
Sunday, May 24, 2015
Summit Racing Equipment, Tallmadge, OH
* Open to all Chrysler Corp. vehicles
* Best of Show, Top 5, Top 30, and other awards
* Free dash plaque for all entries
* Door prizes
* Event...
I am selling a Meziere 100 Series Electric Water Pump part number WP114UHD that sells for $425.94 from Summit Racing, this has only been used on the Engine Dyno for break in and tuning, it is the 42 GPM Heavy Duty Polished unit, it has a small scratch (circled in Red) on the side but other wise...
I have 2 brand new Wilwood front brake calipers part number 120-6816RD. These are the calipers ONLY, they have been bolted on for test fit purposes only and have never had fluid through them. I also am including a set of pads for the calipers. These calipers are the same ones that are included...
I thought I would pass along a link to anyone interested in getting a display stand and graphic display board made for there beloved Mopar. The Produx company owner John Hradisky is great to work with and his turn around time is very fast. Here's what he made up for my Dad's 70' Dart Swinger...
2014 All Mopar Show
All Mopar Show
Sunday, June 08, 2014
Summit Racing Equipment, Tallmadge, OH
* Open to all Chrysler Corp. vehicles
* Best of Show, Top 5, Top 30, Kid's Choice, and other awards
* Door prizes
* Event coverage by the Handy Randy Show
* Registration: $10 day of show
I have decided to finally sell my 1973 Duster that is featured in the Members Restoration section for the last several years. Unfortunately now that it is ready to be painted and assembled, I have decided to relocate to Patrick AFB, Florida immediately following a lengthy Middle east deployment...
Here is a 1968 Dodge Dart built to run in the Hemi Super Stock Class. Quality parts used throughout the entire car, original solid Steel body and roof, doors are also steel (but lightened) Fiberglass hood, fenders, trunk and bumpers. Here is a break down of a lot of the parts included..
-Currie...
Does any have a set of Mopar Performance wide valve covers part# P4876124 that they could measure and give me the overall height, I assume there around 3" but would like to know for sure before spending $300.00.Thanks.
I thought I would post the pictures of the Billet Aluminum Timing chain cover and motor mount combo I just made. I still have some minor machining work to do on it, once complete the motor mount ears will be flush with the block cover. I really don't like the way the Edelbrock RPM head overhang...
Here is a very cool Custom made billet aluminum Timing chain cover for a small block mopar, I bought this about 10 months ago and decided to make my own piece instead, it was used for mock up purposes only...this thing is awesome and will really set your show mopar off...If your looking for...
I'm in need of a Lower steering column cover for a 1970 Dart Swinger. The car has a Rallye Dash if that matters for this piece. Thanks in advance if you can help. P.M me if have one for sale.
The picture below is what I'm in need of that I found in a google search.
I am in need of a complete set of Steering Column linkage for a 1970 Dart with a small block (340) and 727 transmission. My project car didn't come with any linkage and I picked up some but it was for a 904 Transmission and wont work. Thanks in advance for the help. P.M me if you can help
The...