Search results for query: *

So, no problem with it bolting right on? I read something about different spacers for different years.

Getting ready to install my rebuilt engine and I am having a hard time with the cooling system. My original radiator has a big crack in it and I am missing the fan and shroud. I thought I could just simply get an aftermarket radiator and buy the fan/shroud. Its like I opened up Pamdora's box...

Thank you to everyone for your feedback and to Steve “SMCARNUT” for the in depth phone convo. Very much appreciated!

I need to swap out my rear axles from the 5x4 to the 5x4.5 on my 8-3/4. I thought it would be easy but I get more confused every time I reach out to a manufacturer. I understand that the offsets are different and was told I need to change the backing plates as well. I asked Dr. Diff but he did...

I bought an interior screw kit for my 67 fastback but I am still having trouble figuring our what goes to what and what is still missing. Is there anything out there that shows what size and kind of screw goes to what? I am currently working on the back half with the metal deck pan, interior...

Hello everyone! I have been away from the site for many years... I am trying to get my head back in the game and finish my car after 30 years. I basically inherited this car after my brother passed away. I was 19 at the time and he was 25. I am now 51 and over 30 years later I have yet to finish...

Floor shift non-power...

I am looking for a steering column for my 67 Plymouth Barracuda.

Who has the good stuff? I am looking for a few hard to find parts needed for my restoration. This may be a stretch but I am looking for better than just driver quality. I already have these parts but I would rather try to find better quality pcs that require less work. I am looking for the parts...

Here is what I am looking for. Hopefully somebody can point me in the right direction. I have these parts already but with all the work I am putting into this car I would like to have the best quality possible. - Center trunk panel for a 67 Barracuda - 67 Barracuda L/R Front Grill...

Thank You...

How can I find out what the original gear ratio was for my 67 Formula S Barracuda for the transmission and what the set up was in the rear end?

I am not the one doing the work so please be patient. I am not trying to smear AMD. I have bought a bunch of stuff from them. I am just looking for insight. The pictures I have attached show that when they are lined up at the top and bottom of the door it is way off in the middle. Same if you...

the only problem is that they are the only ones who manufacture full quarter panels.

Has anyone purchased the AMD full quarter panels (not the skins)? The guy who is doing my car has shown me that the contour or crown of the panel does not line up at all with the door pillar. He said there is no way that these things will fit properly without major modifications. I called AMD...

cannot find the restoration pictures you are talking about? Can you set up something so we can see them?

For Sale driver and passenger side doors and trunk lid ($125 each + shipping). These are driver quality pcs and will need some work. I also have a hood that is solid with no rust but does have some dents. If interested PM and I can try to get a picture of it. Looking for $300 plus shipping for...

Woody, I live 3 miles away. I will keep an eye out for you...

I have all of these as well. I need ones nicer then what I already have. I would need to see pictures.

Negative... New York

Looking for the following parts for my project. Not looking for concours grade but I am trying to make her as beautiful as possible. Does anyone have anything or can you point me to someone who might be able to assist? - Center trunk panel specific to the 67 - Front Grills specific to a 67 -...

Took me awhile to figure out how to get these pictures up. The picture of her together was about 18 yrs ago. It needs so much work and the money is worse then a drug habit.

What is a fender tag and broadcast sheet? Can I find this out from the VIN#?

I am pretty sure they are 67's. The other question is whether or not there is besides the word Barracuda and the Fish on the fender is there supposed to be a 383 emblem and a Formula S emblem underneath on the other side of the wheel well toward the door?

I am getting ready to purchase a bunch of emblems so that we can put the proper holes in place and weld up ones that are not correct. First question is regarding quality of products. The most common places I have found are Year One, Layson's, Classic Industries. Is there a quality difference...

Guys, I am in the beginning stages of restoring my 67 Formula S Barracuda. I am not a guru at this stuff. Fortunately I have someone who is helping me. I have a lot of questions about correct parts and pcs etc. Where is the best place to post or are there specific members with the expertise that...

Sorry about that. 1967 Formula S Barracuda

I cannot find these part aftermarket. I also tried many of the major salvage yards. Any ideas? [/attach]

After talking to the guy who is redoing my car he informed I was priced too high. I have adjusted the price from $250 each to $125 each. These doors are off my 1967 Barracuda which I am in the process of restoring. I spent a good chunk of change on upgrades which I brought back from Stephens...