My 66’ 273 is factory front cover and cast iron water pump.
I used a Dakota v8 clutch fan assembly and it fits like it was made for it.
96’ 318 truck is what I believed was used. Also fits the factory fan shroud.
So I added an 8 gauge wire directly from the battery to the alternator. So the old wire from the alternator to the firewall and back to the battery is still present. Is this ok or should I take it a step further? I plan on updating the alt to a large capacity to run the stereo. The stereo/amps...
Hey all checking in. As some know I do a high impact cardio class a couple days a week and love it. Only a few of us do it me and three other women. I'm twice their age and they call me the over achiever...lol!! A new girl showed up last week really in good shape very athletic. I soon...
Here you go, straight from Ma Mopar. This part number decodes to the 73+ B/E body guide pin package. It clearly says the pins can be used on the earlier cars, as long as you use the supplied later bushings and use them with the later brake packages.
It says
"INSTALLATION INSTRUCTIONS
FRONT...
Not according to his youtube videos. He specifically says works with inline wedge heads from ford and chrysler as well. Canted valve heads have a different formula.
When I put the HEMI in my car the first time I had an original set of 68 headers. They worked OK but for the street I found even with heavier torsion bars that they would hang down low enough to rub on the pavement on bumps. So I pulled them off and went with the cast manifolds. And another...
Because my hood scoops are aftermarket (Mopars by Crane (now out of business)) I measured & documented each scoop's stud holes center to center. With those measurements I then used AutoCAD to create a stud mounting template for each scoop. The under hood bracing has 3 holes (if I remember...
Got this with a car I bought. I know nothing about it. Could be good, could be gutted and used for a sink in a man cave, lol. FREE! It's sitting at my work. Don't want to toss it in the scrap so, it's here for absolutely NOTHING!
Located in St George Utah.
You can pressure test that. Carefully use low air pressure to pressurize the crankcase while an assistant sprays soapy water over the suspect area. Check it with the intake and valve covers on. Becareful not to overpressurize the crankcase. It doesn't take much to find a leak. You can check your...
We made it to VT and settled in at the AirBnb. The Dart made it with no issues. She ran perfectly.
I hope everyone in the path of the hurricane stays safe.
hey all, looking for an early speedo cable, pre 66 with the securing clip.
new, used, whatever.
if you have a gear to go with all the better.
shipping to 91505
cash, paypal, venmo, parts on trade.