Search results for query: *

Interested in the timing chain. Your inbox is full.

I have one new 1.6 ratio Crane roller rocker arm in its original package. $30 plus shipping.

Take the bowl off and remove the needle and seat. Make sure it is clean and moves freely. They can get dirty and stick and the float won’t adjust. Make sure the arm that attached to the float is clean and moves freely. Check the float to be sure it has not filled with gas. This can happen...

Bump

Bump

To the top

Cam card and end cam pictures inserted.

I have another new Racer Brown STX-21 solid flat tappet small block cam. I bought several of these for bracket racing. I am no longer racing so this cam is up for sale. Specs with 1.5 ratio rockers are 560" lift and 272 degrees of duration at 0.050" lift intake and exhaust. LSA is 105 degrees...

I have seen shops straighten cranks like that also. A wack or two of a mallet.

If you have not already, call Superformance directly.

Bump

Bump

Bump

Bump

Bump

No wonder none of us can find these parts, John had them all.

Bump

Bump

Bump

Sent you a PM.

I have not seen a rating for these rods and I do not have a Childs & Alberts catalogue. I Beams are typically stronger than H-Beam and Howards I-Beam rods I looked at were rated at 1,000 HP and others like Oliver are rated higher.

Bump

bump

bump

Bump

I will take those. PM sent

Looks like the Hughes rockers in post #20 may have labeled a 1.5 ratio rocker as a 1.6 ratio rocker. You can see the rocker on the left has the adjuster more forward than the adjuster on the right. To get the 1.6 ratio, the adjuster is moved closer to the center of the shaft. Either way...

I usually add 0.030” lift more than I need when order a cam so I get around what I want for the final post geometry influenced lift.

Pending payment from first respondant.

PM sent