Search results for query: *

Not a timing issue I do not believe. Ignition failure issue or Vacuum Diaphragm linkage/ way wrong spring in it. Perhaps a broken inner spring or two if you have dual springs.

68 I believe (I will look for a part number) $175.00 A very nice rust free no issues or damage ever/ Free delivery to Long Beach harbor where all my European stuff ships out of.

Looking!

The way I have done it for 60 years (Right or Wrong) is to have no transitional slots exposed. . If required, I drill small holes in the throttle plates to get the idle high enough to tune with the Air Bleeds. However, I deal with very radical engines with very little vacuum signal.

Satchmo Page : Early Professional Black National League pitcher who pitched professionally until his 50's said this == Don't look Back, because whatever is chasing you might be Gaining!!

I like to generally see 1 to 1 1/2 thread below the rocker. All the adjusters I use have a recessed area in the adjuster and that needs to line up with the oiling in rockers, If the pushrod is too long or short the rockers can't oil and that will burn up the top end in short order!

80 is the new 50!

Looks good! I set up a table in the bathroom and trim the gaskets in there. Otherwise, I am always in to big a hurry and rush thru and screw up the center dividers to many times (End up being very skinny). I have plenty of time while sitting there!

I will buy the B housing also if still available!

PM also sent. Should have done that first!

I would love to have it!!

Thanks! I appreciate your good wishes. As far as the Woman, I don't miss her all that much @ 76 years old!! Although I thought I had the best Wife money could buy!

Back when the 340 was new we broke plenty right at that spot even with stock spring pressure. I do believe the 340 rockers were heavier duty from what I remember back them.

Anyone who is curious about us. Goggle: John Irving Drag Racer and my boy Jon Irving Drag Racer My wife could not spell, but she could sure Dance! Last time I will marry a Girl 1/2 my age. She vanished from us when Jon was still a Baby.

I appreciate that! I have owned 3 M code 1969 GTS Darts all bought from Saddleback Dodge in Calif. Also 3 1968 Factory 1968 Hemi Darts. All back in late 60s and early 70s.

I run 8 to 12 on my race cars that never see the street. However on my street / strip cars I run 25 to 30. On my street only stuff, I do not run aluminum rockers. Jesus is Lord!

1000 was the number of conversations which is all that are allower. I removed a couple of hundred so now open!

I hit 1000 Now fixed! Expire: 12/31/2024

I think that cam would be fine. All cams are a compromise that moves power around from one RPM range to another. At full throttle you will seldom be below 2000 for very long unless you are in way the wrong gear.

May God shine his continence and bless those that took the time out of their busy day to put me in their prayers. The prayers of a righteous man availed much and all believers are made righteous through the blood of Jesus.

Well Surgery went well yesterday, and the Doctor said the first 3 Days are the most critical for any problems arising. I found some more Summit 10% coupons, PM me if any of my friends on this site could use a couple of them. My world is bright and shiny again for me! God is so very good!!

I am down to about 5000 sq. ft. of Mopar Stuff. Let me know what you are looking for as I owe you a favor!

Still looking!

A few: PM me as if I post it hear it may be used before you can use it and it is only good for one transaction

If engine is on stock mounts (Stock Location) you should be fine.

In engines we have test similar to your compo = the Victor 340 has generated demonstratable better performance than the Torker II (around 30HP @ 6,000). MY .02 = For Free

I do not particularly care for the 4 light look on a Valiant.

Number is correct. What are you intentions with the car? Street Track Both I would definitely run at least the 3:91 with that kind of cam.

It might be easier to go from 1.5 to 1.6 rockers. If you are not trying to add some additional duration? If there is enough room on your existing camshaft to regrind: Clay Smith Cams has a camshaft @ around 640 to 650 that I have used in several of our 9 Second Bracket A Bodies. They are one...

My understanding was that Keturah was actually Hagar (Sarah's Handmaiden) who had Abraham had fathered a child (Ishmael) with 50 some years before that had taken another name. People lived a lot longer in those day. However, I am very far from a Bible Scholar. Nevertheless, I like your thought!