Search results for query: *

Bob Ida ran one with a blown hemi back in the late 60's. Obviously not a street car though.

Till I die my friend.

I bought a rechromed '72 rear bumper at the Portland Swap meet in April. Finally had a chance to clean and paint the brackets and swap out the big heavy crash bumper. It definitely cleans up the back of the car. Before and after pics.

The 383 is together other than getting the pushrods from Smith Bros. Ended up using the blue Moroso covers. The Cal Customs wouldn't clear the roller rockers. Going to prep the trans next.

The Park clearly instructs people to stay 25 yards minimum from the bison. If you think the rules don't apply to you, then don't whine or complain when you suffer the consequences. Unlike society, nature still operates on the survival of the fittest principle.

Welcome from another Central Oregonian.

Still looking, Thanks

Still looking, thanks

Welcome from Central Oregon

Looking for a nice pair of 15x10 Cragar SST wheels PM me if you have some that you want to sell. Thanks

I am looking for a pair of Centerline Autodrag wheels 14x6, 15x6 BBP 5 on 4.5". PM me if you have a set that you want to get rid of. Thanks

Pistons are installed and cam centerline checked. I had a new Comp Thumpr cam made in 2011 on the shelf. I degreed in exactly at 102 per the specs. I went with a billet Mancini timing chain and ARP cam bolt. Heads will be installed tonight and I will start masking it of for paint.

That is BAD ***!!!!!!!

My J code '68 GTX when we pulled it out of 30 years of storage and now back on the road with a 472 Hemi. We also found the hood and scoop, grill, Hemi emblems and Dana 60 in the storage unit.

KB pistons finally arrived today. I'm using a set of 440Source I beam rods. I did replace the 7/16" cap bolts with no markings that came in the rods with ARP ones that were in the rods in the 440. Off to the machine shop to have the pins pressed in.

My pistons got lost in route from Summit Racing but they were quick to get another set shipped. While I'm waiting, I worked on the aluminum water pump housing that came off the 440. The water passages were quite a bit smaller and didn't line up with the passages in the block. I used a set of...

Crank is in. I used the ARP main studs and billet rear main seal cap from the 440 along with a new red Viton rear main seal. I have had really good luck the Viton rear seal not leaking on multiple engines, even after sitting for a while. The main studs are probably overkill for this build, but...

With all the money you're feeding this beast, please consider other wires. May I suggest Granatelli wires?? They're solid core, but feature an RFI Suppressor ring so the AM radio still works. Solid core means 0 ohms per foot resistance! I have a set on our EFI Jeep Grand Cherokee, and they...

My plan is a retro look for the 383, I have a set of either black Cal Custom or blue Moroso valve covers, TM6 intake, yellow Accel plug wires and a '69 oval air cleaner. I think this will go well with the Centerline wheels. I salvaged a bunch of parts from the 440 for the 383- ARP head & main...

Inbox cleaned out PM sent

Defroster numbers

Still available. You collapse them all the way and turn the shaft, you will feel them click.

Will post a better pic tonight.

Engine update - I got the 440 torn down. The tops of the cylinders were ground on, I guess for valve clearance, but on the lower side of the cylinders. That would match the upside down pistons. Rod side clearance is huge, over .035 on rods 7/8 and 3/4. The sides of the rods were ground on...

I'm trying to finish some projects and have been going through my parts. I have stuff that is not earmarked for my cars that someone else might be able to use. 2 new 4 packs Mr. Gasket valve cover t-bars $15 Sale pending Anchor 2512 new trans mount $5 Set front and rear Competition Engineering...

New in the box Comp Thumpr cam #21-600-5. See picture of spec sheet. $150 plus shipping from 97754. I can do Paypal, buyer pays fees. Thanks

Clean Weiand low deck aluminum dual plane intake #7501 fits 383 & 400. Looks like it was clear coated at some point in time. Recently pulled off of a running engine. $150 plus shipping from 97754. I can do Paypal, buyer pays fees. Thanks

Hope it's found safe.

MSD 7AL-2 ignition controller #7220, matching MSD HVC coil #8251 & MSD tach adapter #8920 $500 for all shipped in CONUS Painless Wiring 50303 8 switch fuse panel with roll bar mount box $150 shipped in CONUS These were installed on a racecar project that never got finished, only ran for...