Search results for query: *

:cheers:

Yes that math is way off not sure what I was thinking You are right I need to remount wheel and measure with more than my calculated eyeball. (will do this tomorrow) and report back May one day just unbolt current rear end from springs and toss tires on the b body rear i already have and...

PM Sent

It looks like a ton of room but again pictures are deceiving. These 315s unfortunately are not a true 315 more like a 1/2 inch narrower from research I have done. The rear end currently on there is a SBP 7 1/4 (slighty more narrow than a BBP 7 1/4) but has the crappy cast aluminum adapters just...

Just need to toss my front spoiler, scoop and hood tach back on with these wheels for a picture. I would also definitely want to drop the rear 2-3 inches by running the afcos 72BluNBlu has and get FF 1.06 or bigger torsion bars, poly bushings all around and larger front sway bar and add a rear...

Ok so I finally tried them on my duster after finally getting it back on its feet and on the concrete driveway. I also used a wheel measuring tool and found that the Front wheels are 17x10s Rear wheels are 17x11.5s -The fronts 17x10 with 6 1/8 inch backspace These bolt right on no...

Happy Birthday Tony!!!!!!! Hope you had a great one bud

#2468370 10-1/2" clutch A-833 Big Block 1965-66 B-body C-body

The rust is just from it sitting for a year since it broke

This is how mine broke

I had one explode just sitting in the yard 440/727 combo in place of the swapped in 318 So I had to raise front end by tightening the adjuster and it snapped a few weeks later. Turns out the PO had removed the front suspension to rob the sway bar LCAs and swapped the bars side to side Causing it...

The beak is different 73-74 are but different than 75-76. The center piece where the grill ,punt sticks out further on a 75-76 which causes the earlier grills not to fit correctly

It was an insurance repair... Not a special high dollar restoration...

Anyone??? Don't want an empty hole in the dash!

To the top

Not gonna sell fixing for my other 73 Duster... It is an original Direct Connection Spoiler made of ABS. These were later copied by MAS out of Fiberglass. I would take 2 of these rear spoilers and 2 Front Spoilers all dependent on price

Badass Build Love this car and the stripes look killer!

It sure is Rob :cheers:

I do not know. I have never tried it as I don't have an MSD Distributor to try

Cool man... I love your Dart so clean!

Sold!!!

Looks great Keep pushing for progress!

Above poster backed out after being told I would not send the covers until his MO cleared the bank:wack: Still up for grabs 105 shipped

Last one

More

Hi there ladies and gentleman of FABO, I have for a sale a blue radio delete plate. It is in good condition with no nicks or gouges. This came out of a valiant that should not have been at the junkyard I am looking for $40 shipped anywhere in the lower 48

Hope to make it coming from Tampa

105 shipped to you OBO Want gone taking up valuable space

I Would Like to know as well

Bump Still looking even a repop would work