Search results for query: *

Just got a deal on a new set of 60775 heads. The Edelbrock website recommends 7326 gaskets, can anyone comment on these. I have a couple of sets of Felpro 8553's would they work? I've read that the 1008 were recommended, but there pretty pricey. They are going on a street 408 with 9.5:1...

Hey all I replaced a blown header gasket and now I'm getting an erratic popping sound out of the exhaust. When I pulled the bolt on the end of the head of course a bunch of coolant Spilled Out, some of it might have spilled into the header. Could this popping noise because by leftover coolant...

Will the earlier clutch and brake pedal pads fit one the 72 and later pedals? I ask because I want to add the chrome bezel surrounds and I can't seem to find them for the later pads. Here are some pictures These are the older pads These are the newer ones

Using a heat gun to restore faded vinyl panels? I've seen people do it on YouTube. Anyone here try it?

I'm building a 408 with a Scat cast stroker crank, Procomp rods, Icon forged pistons in a 360 block. I took the components to the machine shop along with a standard 318/340 harmonic balancer because its supose to be internally balanced to get it all balanced. The shop is telling me that they...

Is there trick to getting the old one off and the new on? I tried a pair of pliers and it's not moving. I don't want to break it!

Had a front U-joint come loose on me the other day. Fortunately it didn't come of completely before I was able to pull off the road:steering: I went ahead and had it towed to a shop and they were able fix it by just replacing the joint. One thing concerns me however, they told me that they...

I just bought a car with a Holley streetmaster carb and it has a lot of hesitation when you get on it. I happen to notice that someone mounted the fuel filter before the mechical pump. Would this cause a problem with fuel flow?

I just bought a Challenger with a 340 4spd. It has x heads 10:1 with a pretty wild Lunati 10200705 Voodo cam: Advertised Duration (Int/Exh): 284/292 Duration @ .050 (Int/Exh): 242/252 Gross Valve Lift (Int/Exh): .533/.552 LSA/ICL: 110/106 I'm having trouble with power break boosting or lack...

Plymouth, 1965 Barracuda 52,000 miles, original engine and interior, excellent | eBay And Plymouth, 1965 Barracuda Formula S | eBay Same car? Notice seller has no feedback!

Need a A833 trans for an E-body 23 spine input shaft in good shape preferably in NC or southern VA

Sorry guys I just had to vent a little. So I buy this 73 challenger 340 4spd supposably restored. It had a problem with the transmission which I knew about when I bought it but when I pull the transmission I found out someone had forgot to put oil in it and it is now it's complete trashCheck out...

Anyone ever buy anything from these guys? The Mopar Dude-Sales of Classic Cars and Muscle Cars. Burlington, Kansas

I just bought a 73 Challenger with 3spd wipers. The wipers work, but they don't go back to park? What should I be looking for? The harness is new, but the switch and the motor not.

The lock in my 73 doesn't stay in the column, it's just pulls out. Is there a way to get it to lock in place? Could it be missing a retaining clip or ring?

Anyone use this clutch? McLeod StreetPro Clutch Kits 75109 https://www.summitracing.com/oh/parts/mcl-75109/overview/year/1973/make/dodge/model/challenger I'm looking in a replace a clutch in street drived 340

I just bought a 73 Challenger with a 4 spd. When test drove it the trans made all kinds of racket, but it seems to go in gear ok and the noise went away when I put t he the clutch in so I assumed it probably had a bad bearing. I towed it home and and I would only move in and out of the garage to...

I can't find one available at an auto parts store, but sure there's ones for other applications that will work??

New in my garage

I'm the process of swapping out externally balanced 340 for a internally balanced for 408. I have 3 converters the one used on tge 340 seems to have a high stall, and the other two are supposedly stock 318 converters. I know very little about tq's, and there are no significant markings to tell...

I believe they are the same for must all 60's small blocks (please correct me if I'm wrong) I going to re-condition the valve covers and I just one.:D

1964 65 barracuda plymouth v 8 4 speed hot rat rod | eBay

I'm modifying a stock fan stroud to fit an aluminum radiator, how tight does it need to be around the radiator?

I've done the searches and there's just to much information to sort through. I'm currently in the process of switching over a high revving 340 to a street driven 408 making no more than 400 horsepower. The car had a 3500 stall converter and I want to switch it to a 2000 because this is going...

I bought a set of 596 heads a while back, they have bronze valve giudes and stainless steel valves with 2.02 Intakes. I took them apart and cleaned them up bit. I have a question about the ports. The intake and exhaust port seamed to left alone, but it looks like there was some work done behind...

Is it a bad idea to lift the motor using a carburetor plate with an aluminum intake?

I'm building a 408 with a 360 block, the rotating assembly will be balanced. Can I just use 318 / 340 balancer?

Can you use a stock pickup?

I have some more small block parts: 340 crank came out of a low mileage motor (so I was told), real nice shape no scoring at all, mains journals 2.499" rods 2.140" drilled for pilot. Shot pinged heavy duty cast crank nice upgrade for a 318 $100 Set of 340 floating pin rods and pistons...

I just wanted to let you all know. I just had a great experience with these guys! I got a great deal on a Scat stroker crank and some Icon Pistons, free shipping to boot! Here's a link Performance Parts they don't have much on their website but talk to Dan (real nice guy ) I'll bet he can get...