Search results for query: *

Is the idle smoother with the hotter plug?

And maybe lousy rocker ratio. (1.5 rocker, maybe 1.45?)

FYI: the cam lobe peaks have an angle taper to them so they will spin the lifters. So you want to try and measure on the high side of the peak to read maximum lift. ☆☆☆☆☆

Harrison, Your ignorance is showing. There is no 'explosion' in a properly designed IC engine. The mixture burns at at a controlled rate...

Thanks again for the information everything was normal till I was about to leave the car show and the dash lights were stuck on again, it's just odd that it's so randomly happening tried twisting the nob again no change so once I got home I pulled the fuses and no change, going to get the...

There is a trick for doing drywall corners with a flat blade putty knife. Put your fiberglass tape on, then apply the setting type mud one side at a time. Do one side, let it harden up overnight. Then you do the other side the next day so it doesn't dig into the first pass. If the mud you put...

You can use a slightly damp sponge to help smooth it. Then use a small hand held sanding block that has a few different angles on it. I don't mind the boarding and taping. Mudding/sanding sucks. I'll put on 5 gallons of mud, to end up with 4 gallons of dust on floor lol. Good luck.

Since I am a sucker for punishment, I put my brother's 68 Dart on the hoist tonight to look for the source of it's oil leak. Looks like someone has tried to epoxy or JB Weld the oil pan. :BangHead: Front crankshaft seal leaks a little bit too, as do the valve covers.

Hey all, I thought I'd give a little update on my progress with the Valiant. I started it up for the first time today, and everything went pretty well! I unfortunately didn't get any videos, but I'll probably post some once I've spent some time tuning. I also seem to have a vacuum leak...

1. Heater box 70 to 72 duster complete except no cables $200 2. 1972 front and rear bumper brakcets full set $75 3. AM radio with knobs $40 4.rear window trims $75 5. Roof drip mouldings non vinyl top $75 6.2 super quads one is 9800 other 9810 Is for GM $300 each. 7. 73 dart sport dash frame no...

Did you find a solution?

I have one, pm sent

So I have the Ventura up and running again after a couple weeks of work and aggravation. What started out as putting the new wheels and tires on, grew into fixing the annoying oil leak it has had for some time. That progressed to pulling the motor out, finding out that the main and rod bearings...

I would say light. I'll try to remember to post pics of ours in am.

Its not l asked him already

I need this lol...let me know if one is still available

I was in my shop working this morning at 5 AM... I finished around 12:30 went home, took a shower & went to bed till around 8 PM... After 8 the whole area sounds like Bagdad... ***** blowing up constantly.. After it quiets down I might get some more sleep, then back in my shop before 5 AM...

:lol: We used to play baseball or basketball all the time in the Mojave Desert summer heat. We dint have cell phones way back then. Had to do something to keep us occupied :lol: PS .. My old hometown got to 115° today.

My brother in law was a drywall taper and I remember him talking about corner tools for drywall work. I don't know if a local hardware store would have it but I'm sure that a drywall supplier probably would

That says a lot about the integrity of both guys. Kim

I haven't heard any sirens . The pyrothechnic displays haven't started any major fires yet. Still goin' strong they are.

That's very true, but the "math" not including the valve train should come out right.

So I'm doin some work on the house. I hate sheetrock and drywall, but that's where I'm at. Removing all the batten so the inside won't look so trailerish. So I'm in the rear bathroom and Have gotten a couple of the flat joints done pretty good. Actually dang good for me. lol I'm in the corner...

Too damn hot lol, although last time I posted here I've made a lot of progress on my car.

How well I know!

That's not bad at all During the scamdemic us and 25 of our closest friends went on vacation in Phoenix, in the middle of a heatwave By 10 am, the mercury was sitting at 120 degrees, and I swear, it felt better then 90 does back home in the Michigan humidity

That proves the IGN 2 is not providing battery voltage to the coil plus during cranking. Why is the big question.

Will this accept a manual push rod? Thanks. Kim

What's the gap between you inside rim and the outward edge of the upper control arm? Lots of factors and stack up going on here: QA1 UCA's, QA1 LCA's, willwood brakes. Makes it tougher to draw comparisons.