Search results for query: *

home is where you make it, bro. no shame in the game. i lived in my shop for about two years while i built out/reno'd my house. rigged up a garden hose shower and cooked on propane/charcoal grill or white gas camping stove for a good part of it. i don't know if Dr. The Mrs. would go for that...

The cam grinder assumes the rockers will transmit the correct ratio to the valve. So if the cam is sold as having 0.450" valve lift, with 1.5 rockers, the lobe lift will be 0.300" if the cam has been accurately ground. Is the cam new or used? If used, & lobe peaks are worn, it will be hard to...

They used the green board in our bathrooms, our house was built in 2007. I've never heard of blue board, is it new?

Use the damp sponge. Sposed to use it on dry mud. Just go light n gentle

Sounds like you have the Bettes book, a great book. I find that a lot of assumptions are made with some of the calculations, resulting in wrong final numbers. D. Vizard also has an excellent porting book, SA 215. He claims the common 28" used is a compromise.

I'll think about. I'm surprised someone hasn't made a crack about us living in a mobile home yet.

Post some pictures when you get it done, I have to redo my bathroom soon.

I am simply removing the batten. The drywall that is there is remaining. And yall, the joint compound is already SET and DRY. That's why I'm asking about sanding it. Thanks for the tips. I guess it's going to have to be the sanding blocks.

Out of curiosity, did you use blue board drywall in the bathroom?

I think Summit actually tries to provide parts made in USA. That's a rarity these days.

340 manifolds. Too much bashing and cutting(steering tube) for me.

With your current intake, you have 7 cyls that can interfere [ they are cross-connected ] with the cyl that is drawing air. With a dual plane, much less interference, only 3 can interfere. I have no experience with your type of EFI, but it maybe a factor to look at.

Pretty sure FORScan is Ford only. But AlfaOBD is a similar program and works well on late model Mopars. But I doubt it can turn off MDS, I think that is a PCM deal only and AlfaOBD is more about body module settings like to turn on Performance Pages.

Just leave the alternator spade connector off. Thank me later. lol

One of the places I worked at had random inventory/QC checks Each day I had to pull 5 warehouse locations, and print out the blueprints, make sure the amounts are correct as they are in the inventory AND make sure they were in spec with the blueprints Well, one day I print off a blueprint...

Is the idle smoother with the hotter plug?

And maybe lousy rocker ratio. (1.5 rocker, maybe 1.45?)

FYI: the cam lobe peaks have an angle taper to them so they will spin the lifters. So you want to try and measure on the high side of the peak to read maximum lift. ☆☆☆☆☆

Harrison, Your ignorance is showing. There is no 'explosion' in a properly designed IC engine. The mixture burns at at a controlled rate...

Thanks again for the information everything was normal till I was about to leave the car show and the dash lights were stuck on again, it's just odd that it's so randomly happening tried twisting the nob again no change so once I got home I pulled the fuses and no change, going to get the...

There is a trick for doing drywall corners with a flat blade putty knife. Put your fiberglass tape on, then apply the setting type mud one side at a time. Do one side, let it harden up overnight. Then you do the other side the next day so it doesn't dig into the first pass. If the mud you put...

You can use a slightly damp sponge to help smooth it. Then use a small hand held sanding block that has a few different angles on it. I don't mind the boarding and taping. Mudding/sanding sucks. I'll put on 5 gallons of mud, to end up with 4 gallons of dust on floor lol. Good luck.

Since I am a sucker for punishment, I put my brother's 68 Dart on the hoist tonight to look for the source of it's oil leak. Looks like someone has tried to epoxy or JB Weld the oil pan. :BangHead: Front crankshaft seal leaks a little bit too, as do the valve covers.

Hey all, I thought I'd give a little update on my progress with the Valiant. I started it up for the first time today, and everything went pretty well! I unfortunately didn't get any videos, but I'll probably post some once I've spent some time tuning. I also seem to have a vacuum leak...

1. Heater box 70 to 72 duster complete except no cables $200 2. 1972 front and rear bumper brakcets full set $75 3. AM radio with knobs $40 4.rear window trims $75 5. Roof drip mouldings non vinyl top $75 6.2 super quads one is 9800 other 9810 Is for GM $300 each. 7. 73 dart sport dash frame no...

Did you find a solution?

I have one, pm sent

So I have the Ventura up and running again after a couple weeks of work and aggravation. What started out as putting the new wheels and tires on, grew into fixing the annoying oil leak it has had for some time. That progressed to pulling the motor out, finding out that the main and rod bearings...

I would say light. I'll try to remember to post pics of ours in am.

Its not l asked him already