Search results for query: *

Safe trip Bro.

Just need a good clean and buff. They have been wall art long enough. $230.00 plus the ride, or Prepay and pickup at Carlisle. I will be out of town after I post this until Tuesday. So PM only. Shipping from PA. 19001 zip code. Pay pal or postal Money order.

I've been told that he's trying to do some work to it himself so that he can get a better price for it.

Still available Tom

Still available Tom

Still available Tom

Original Dart GTS tail panel in decent shape for a 55 years old. Has a few minor dents and normal pits and scratches around the keyhole but not torn up. The Dodge GTS logo is part of the panel, not a stick on. Only missing a few studs. Comes with 10 speedy nuts. Asking $175 (+shipping) Or If...

Thermo-quad intake I believe it’s a 1972 will fit 318,340,360 Would rather not ship because it’s gonna be heavy, local Pickup Tucson, Arizona, $100 bucks. Plus shipping if shipped Possibly can ship might take some figuring on packing.

That will have zero effect on dash turn lights

Voltage readings: Battery at rest - 12.5 volts (battery is 7 years old) Battery when cranking - 10.5 volts Voltage at + side of coil when cranking: 8.5 volts (does not start) Battery to + side of coil voltage drop from battery when cranking: 1.8 volts (does not start) Battery to + side of coil...

68 fastback fold down seat hinge covers extra set. I don’t need them $35 shipped for the pair.

It is a beautiful car.

I advise you to take a thermodynamics class and get back to us. Isn't he the guy that you were taking advice from on port timing awhile back? I also advise you to walk away. You're not conveying your position well, and even if you were, do you really think that anyone is reading all that? I...

I am seriously considering Craig's Barracuda. It is really once in a lifetime opportunity. Just working on the funds...

$150.00 delivered to Carlisle

...DP/no spacers. She is getting fresh cold air from above the hood, and She runs TTI headers with full-length 3" duals. And, I run it at 207*F. > IMO, she runs, perfectly at all throttle/load settings with no flat-spots and no hesitations of any kind. > until recently, the plugs were new...

Thanks for the info and especially MSD 6 Hemi, so the MSD system needs the earlier type of reluctor found on like the 1st 5.7 and 6.1? I was also looking into other engine management scenarios I was told Holley is good. Excuse my ignorance but this is my 1st dive into the modern stuff and I'm...

Well you need to do some actual TESTING, not guessing. FIRST if you do not have such, wander over to MyMopar.com and download both volumes of the 73 service manual, and while there, go to the wiring section at MyMopar and download the simplified aftermarket diagrams, which can be easier...

https://www.c2cfabrication.com/?smid=39684632&smsub=NPGIZMYRB2KI34KIHG456Z4TIU======&utm_campaign=smartrmail_manualcampaign_030724_39684632&utm_medium=email&utm_source=smartrmail

@ZMan67S and I will be on 70 East for days! Just look for smoke carnage and flashing lights! On serious note I am very excited to meet a bunch of the NE boys! I would love to walk out of Carlisle with someone interested in buying my Cuda. The tire kickers wear me out.

You can easily test for it. If you can not prove it is not happening, do one of what I posted in the bottom of post 25. The simple answer is this: Either your newer car has an isolated bypass contact or not. (the old IGN2) If not, then backfeed is gonna be a problem. If that is so...

They say the universal u bolts are round at the op where the bolt contacts the top of the axle tube. This will crush in the tube. That is why it is important to have the right u bolts. From what I have read.

No problem, i also didn't want the round ones, don't like the dent they leave..

Thank you Icetech for the advice on Macini Racing .I see they have the proper ones with the flat spot at the top of the u bolt. Thanks again.

Very clean black steering wheel assembly with horn ring and cap. No pitting, no cracks, taken off my stock 69 Dart about 7 years ago. asking $175 (+ shipping). Or (Can bring to Carlisle PA next week for buyer pick up if needed). Thanks Joey

mine works fine in the pan. never had one issue with it.

I ordered mine and received the hydraulic pedal assembly. Looks pretty good. The reservoir is quite nice. I wish it came in black anodized though so that it won't stand out so much in the engine bay. I took out the pedal support out so I can paint and rebuild it. I also ordered a brake...

Make certain the front sockets are actually grounding. If necessary, solder pigtails to the socket shells and run over to the body and a screw, etc