This is a powerful little compact fan for tight spaces and 22" radiators. I had this on my Early A body. It's for a Chevy HHR application and measures 22.5" wide by 18" tall and is a little under 4" thick at the motor. I'm including the adjustable Derale 16759 Fan Controller with temp sensor...
Let’s have some fun measuring boost back pressure under different scenarios. Step 1, install pressure sensor:
1/4” OD copper tubing, compression fittings, weld bung, 100psi sensor wired and calibrated in TunerStudio.
Hi folks. I’m looking for a replacement for this driver’s side vent wing bracket that has a broken pivot pin. Mine is a 65 Valiant Signet but I believe they interchange with similar year Darts and Barracudas.
Parts are off of my rust free S. California 1965. I rebuilt the entire front end with a PST kit several years ago and they have low miles on them.
- K-Frame notched and boxed for Kevko or wide pan - SOLD
- Upper A Arms, small ball joint. SOLD
- Lower A Arms. $150 shipped
- Strut rods. SOLD
-...
AutoMeter Ultra-Lite Pro-Comp II Tachometer, 5” with memory recall. Works great. Just removed from my car.
$125 shipped to lower 48. PayPal preferred. Thanks
Anybody following this guy’s build? I follow him on Instagram. Amazing creativity and craftsmanship. Just ignore the power plant choice.
1964 Dodge Dart - Triple20 - CarBuff Network
This came in a 727 I bought off my buddy after he switched to a PG and I don’t think I’ll ever use it in my mostly street car. I believe it’s an older Tranzact valve body but there are no markings to confirm.
$350 shipped to lower 48.
PayPal preferred. Thanks
These are off of my 65.
Excellent condition. Rebuilt with a PST kit a few years back. Includes torsion bar adjusters.
$75 + shipping. PayPal preferred.
$200 + shipping without the pitman arm. PayPal preferred.
Ran this briefly on my 65 before swapping out the front suspension for rack and pinion. It’s practically brand new still as I rarely drive my car. Probably has less than 200 miles on it.
Was on my car until I swapped it out for the PST fast ratio box. This one should be the 24:1. Very clean and turns smoothly. No binding or slop.
$50 + shipping to lower 48.
13lbs in a 12” cube box from 33186 if you want to research shipping cost.
PayPal preferred. Thanks!
Used once for reaming out my spindles for large ball joints. Extremely sharp and easy to operate with a hand drill.
$50 shipped. PayPal preferred. Thank you.
Here's my write-up, review and lots of pics on this front suspension. I installed it over the summer on my 65 Valiant and have been putting plenty of street miles on it. Let's get the FAQs over with first.
Cost:
- A Body Mopar Street Kit (K-Frame, Upper and Lower Control Arms, Steering Arms)...
Bought one of these cheap off of Amazon after seeing good reviews about it on line. It won’t clear my BMW radiator but I’m considering buying a different rad just to fit these fans. Combined CFM is about 3450.
Sharing pics and dimensions here if other folks want to consider using it.
Around the...
It’s a long shot, but anyone looking for a 63-66 V8 front suspension setup in Miami, Florida? Local pickup only at the moment. I’d hate to ship it.
Selling my complete K-Frame (63-66) and suspension. Was completely rebuilt with a PST Super Graphite kit (about $400) about 9 years ago but has...
KYB Gas-a-Just shocks x 4.
These are practically brand new. Probably on my car for less than 100 miles. Perfect working order. Bushings are still mint. These should fit all A Bodies.
Part numbers are:
Rears - 554284
Fronts - 553317
$100 shipped.
Prefer PayPal but I’m flexible. Thanks!
I put these on my stock suspension street/strip 65 a few years ago. They are still in good shape. No leaks. The dents in the rears are from the back brace but do not interfere or degrade the shocks functionality in any way.
$100 for all 4 + shipping.
PayPal preferred but I’m flexible on...
KEVKO M302 360 oil pan and pickup. It has a 1/2” NPT bung in the front pass side corner for turbo oil return but can be plugged. Overall in good shape. A few dents and dings.Full specs are here:
M301 - 340M302 - 360Stock Location
$200 shipped to lower 48. PayPal preferred but I’m flexible on...
Very clean 5.9 Magnum rear sump oil pan - $100
Magnum timing cover - $50
Magnum accessory bracket with idler - $50
Pulley - $30
————
Shipping to lower 48 included in each price. Make me an offer on the whole lot and that’ll save on shipping. Thanks
Brand new in the box fully assembled CNC ported heads, head studs and 1.6 rockers. I don’t think I’m ever going to get these installed so they should go to a good home. Sold as a package.
$1900 shipped to lower 48.
PayPal preferred.
Part Numbers
———————-
Heads PCE281.2151
Head stud kit...
- rear shock crossmember $50
- Inner fender shield pieces (2). Photos show both sides of each piece. $50
- steering box shield $25 (black piece, not sure what this is called). Came off the drivers side K frame of my 65 Val with power steering.
- radiator support $50
All prices are + shipping...
Now that I have a few miles on this thing and nothing big has fallen off the car I thought I'd share pics of my triangulated 4 link I built over the summer. I used Del-Sphere Pivot joints from Spohn for the uppers and lowers axel side and polyurethane joints for the front lower link. No squeaks...
This started as a brand new fuel tank and then I added the sump. Sump has 2x 3/4” NPT female bungs. Tank is clean and rust free.
I’m including the tank strap/bolt and sending unit with 1/2” pickup. I used the sending unit as my return line for my turbo FI setup.
$200, shipping included to...
This came out of my very clean and rust free Southern California 65 Valiant. I built a 4 link and pulled this out to make room for Coilovers.
$75 plus shipping. I have the shock bolts also for $30. PayPal only please.
Just changed my rear setup and have some leftover hardware from my 8 3/4.
- Shock plates and 7” U bolts $100
- Upper shock bolts $30 (1965)
- Axle shims 6 degrees - $25
- US Car Tool axle perches. Never used - $25
Would love to sell all together. Make me an offer. Shipping included in price...