Search results for query: *

Looking for a complete cigarette lighter socket assembly for a 70 Swinger, I have the proper lighter already, just need the rest. But if you have a nice complete assembly that you dont want to split up, Ill consider that too. Mods, I cant figure out how to put the green "wanted" prefix in my...

So whats the scoop on the lighter location in a 70 Swinger, 340 4speed, in the bezel, in the ashtray, both??

So I bought a delrin adapter from a member here to adapt a flip top door to my Swinger. No problems with the adapter, but the damn door does not want to stay closed, not even when its off the car, it just keeps popping open. it seems that the edge on the door part that is supposed to catch on...

I have found that the woodgrain shifter ball came factory on 68-75 A bodies, was the white ball also offered as standard (no pun intended :) ) , or was the woodgrain the only option?

So @Oldmanmopar left a nice brief tutorial on how to install the front glass on my Dart, but I cannot find one regarding the back glass, is it basically the same as the front? I came across a youtube vid where the guy said he installed the rear glass in about 7 minutes using the rope in method...

Since my speedo was out on my '70 Swinger, I put a new speedo drive in her A833. Since I dont know my diff ration for sure, I did the tire/driveshaft rotation trick and figure I have a 3.55 installed; I measured the circumference of the shaft and laid a piece of masking tape on it measured out...

So Im looking around for wheel bearings for my Swinger, and Im seeing in the application descriptions for 9", 10" or 11" brakes. Am I correct to assume that by 11", they means disc, for there were no 11" drum brakes(as far as I know :) )

So Im installilng a Grant tuff wheel into my 70 Swinger and I purchased a repo can so I wouldnt have to use the Grant install kit, and have it look more factory. As you can see by the pic, I have a 1/4" gap and some spline left after tightening the steering nut, this cant be right, has anyone...

I also always thought that the factory Swinger gas cap looks ugly and cheap, like its from a bargain parts store. But Ive always loved the flip top gas cap found on Cudas and Chargers, so when I saw this thread Here I jumped at the chance to put one on my 70 Swinger, bought one, and bought a...

I want to put a tuff wheel into my 70 Swinger, so I picked up a wheel from Classic Industries WHEEL and splurged and bought an A body steering wheel adapter can CAN , and I already have a Grant install kit currently in use with another Grant wheel in my car. The problem is, I dont see how I can...

So my buddy recently refreshed his motor due to a cam change which included removing the crank assembly(67 Cuda 340 auto), upon reassembly he replaced the rear main seal of course. He also installed a higher stall torque converter, I only mention it because it was a change and probably unrelated...

So has anyone removed a heater core recently and remembered if it was a serious PITA? Im looking at my car and thinking that its probably not a great time.

I didnt want to hijack this thread HERE so I started my own. I also have a very low brake pedal which I do not like at all. In the other thread, a member mentions getting a (edit) longer under-dash pushrod, which makes a lot of sense, has anyone had any experience with an adjustable one like...

First question is, included in the LED cluster bulb kit for my 70 rally dash was a glovebox bulb, but it doesnt seem to want to work when I plug it in, a standard bulb works just fine, but no matter which way I put this LED bulb in, it just wont work. Could it just be a bad bulb, or am I...

Does anyone know what year this signal/column is from? This is whats in my 70 Swinger, just wondering if its correct for my car or not.

Fired up the (until now running beautiful)70 swinger today, 340, MSD ignition, and right away noticed that my Autometer voltmeter wasnt showing around 14 anymore, but a hair over 12 without fluctuation. Took it for a quick drive around the block and no change, half a block away from home, I...

The brake setup on my 70 Swinger is rear drum/front discs/power brakes. The master cylinder appears to be stock in appearance with a casting number of 29919C, can anyone confirm that this is the correct MC for my car? Also, Ive been reading that people seem to be happy converting their power...

From what Ive read, the general consensus is that aluminum is usually not a good metal to ground to, so what are some thoughts on my main battery ground wire being grounded to my Edelbrock aluminum head? Should I relocate it?

So I just replaced all my dash lights with new sockets and LED bulbs, (PCB has been replaced as well) and its still not very bright, it seems those blue diffusers really tend to block the light. Has anyone tried removing them or modifying them to get more light on the gauges? I know one member...

Long story short, I don't need the speedo that I bought from Herbs/AMS so it is up for sale. It uses the later clip-in speedo cable, its in really nice shape, and they tested it before shipping to me. I haven't installed it, and the only thing I've done to it is repaint the needle fluorescent...

1970 Swinger with 150 mph speedo in a 71+ dash(round radio knobs). Is this the proper amount of thread that the odometer reset should have? Wondering because it wont poke through the hole in the dash bezel to screw the knob on, and it doesnt look broken; I have a second speedo that has the...

Was just modifying my fuel gauge IVR when I noticed that the indicator arm seems to be pointing up higher than I would think it should, and since the one I am replacing doesnt have an arm, I have nothing to compare it to. Is this normal for the indicator to be angled like this, or do I have the...

Im wondering if anyone has actually recovered a fender tag that has "gone missing" by posting info about it here. Mine is missing, and Ive pretty much given up hope of ever seeing it again. Around where I live, people actually remove the tags and store them someplace safe for fear of them...

Just as the title says, driver quality bench seat from 71-76 a body for sale in Saskatoon, Saskatchewan Canada. $200 obo, must pick up, too big to ship obviously.

For sale is my 2016 Harley Davidson Ultra Limited FLHTK. If you are looking to buy a bagger and want something fairly new without having to pay outrageous dollars, then this is the bike for you. First off, she is a one owner bike, has only 19,407 km on her, and is in primo shape. I hesitate to...

Hops this is the correct thread to post this, if not, mods please move it. Question about different plant locations on my block. On the "date machined" pad on the drivers side below the head I show a "W" code meaning Windsor Ontario plant, but on the passenger side oil pan vin pad, I have a...

Need a complete set of seat belts for a 70 Swinger, buckets, black, please nothing dented or banged up

So my buddy has another issue with his ignition in his 67 Cuda 340. It seems that the motor fires fine, but shuts off as soon as he lets the key off the start position. Its obvious that current is not flowing in the run position, but he is not sure where wires would be gone awry, he has not...

Im sure the dash I have in my car is for a 71+ car because it has the turn knob radio, and not the thumbwheel. So the question is, did a 70 every come factory with a turn turn knob style radio? I dont think it did, but I was wrong once before.... :)

So I bought a set of TTI long tube headers for my car, 1970 Dart Swinger 340 4spd. I havent installed a set of headers in about 30 years, so I figured Id take it to my local hot rod shop to do and consider it money well spent not having to lay on my back and fight with them. The shop has almost...