Search results for query: *

$220 plus shipping

This is a nice set of factory rockers and push rods. And, yes they have bananas! Taken apart and cleaned for inspection, all the components are there and look to be in good condition. Very little wear on the shafts. $230 plus shipping from Bristol Tn 37620. Thanks FABO.

Thanks, good info but .097" is plenty in my world,lol. Socket cap screws takes care of any overhang. :thumbsup:

Hey, I can turn down your bearing retainer to fit if the bolt holes are in far enough. I've read about people doing that.

Bell housing Per Brewers site: 10.5″ small block bellhousing cast #3515734 to fit 1972-4 A-body (will also fit 1967-1971 A-body if BSB734 bellhousing ballstud bracket is used) and 1970-4 E-body (except 1970 with reverse lockout linkage) 318/340 3 & 4-speed applications, 4.354″ bearing retainer...

pics

Here's a small block bell housing in good shape 3515734. All threads are good with one starter thread a little shallow, see the pics, BUT I threaded it deeper and made a longer stud to engage deeper in the hole. It's good to go. There is a fork that can go with it for an additional $25 , it...

This is a nice set of factory rockers and push rods. And, yes they have bananas! Taken apart and cleaned for inspection, all the components are there and look to be in good condition. Very little wear on the shafts. $250 plus shipping from Bristol Tn 37620. Thanks FABO.

This is a nice set of factory rockers and push rods. And, yes they have bananas! Taken apart and cleaned for inspection, all the components are there and look to be in good condition. Very little wear on the shafts. I can ship them apart or assemble them with some fancy teflon grease, your...

Small flat rate is $10.20, ground advantage is just under $9

Here's a couple of electronic ignition tune up parts for that trusty little slant 6. Standard brand replacement item's have the original packaging but was removed and never installed. $10 plus shipping from Bristol Tn. 37620 Thanks FABO

273 style that is a true 90°, but works on any small block. 90° oil filter adapter with a good bolt, no twist. $75 plus shipping from 37620 Bristol TN. Thanks

273 style that is a true 90°, but works on any small block. 90° oil filter adapter with a good bolt, no twist. $85 plus shipping from 37620 Bristol TN. Thanks

Early A body V8 273 or 318, maybe 340 with washers under one bolt, I've never tried that. I won't be using these so you might as well. Also the 90° oil filter adapter with a good bolt, no twist. All for $150 plus shipping from 37620 Bristol TN. Thanks

This will get you started on converting that early A body to a V8 273 or 318, maybe 340 with washers under one bolt, I've never tried that. I won't be using these so you might as well. Also the 90° oil filter adapter with a good bolt, no twist. All for $150 plus shipping from 37620 Bristol TN...

Hats off to two fine gentlemen, oldkimmer and clementine!

CAT brand bronze gear to press on your big block shaft. Save that roller cam. $45 plus shipping from Bristol Tn 37620

#Oldmanmopar , easy fix, mine started to twist so i welded up two opposite holes and drill new ones a little higher or lower. I think i actually drilled two smaller holes per side.

I forgot to mention that I checked it across the contacts with an ohm meter and it all good. Also price drop to $60 plus shipping.

It looks like 4091521 to me. I can't seem to find a good part number lookup online. BTW that's brown shellac on it, not a bunch of rust, lol.

....price drop $60 plus shipping... Here's an alternator armature that I had pushed back in my stash. I'm not sure of the Amp rating but there is a legible part number on the box, if that can be tracked down. $60 plus shipping from 37620. Thanks FABO

Now that gas prices are taking their tole on the car hobby, those earth rotating gear ratios gotta go. Here's your chance to go crusin' by those gas pumps. A nice set of 2.94 ring and pinion gears with a great wear pattern for your 8 1/4. $40 plus shipping from Bristol, TN 37620

Hey Rob, are you getting my PM's?

I'll take, pm

Pm on main caps

I'll take one, pm

What rbkt65 said plus unplated round black handle= truck

I don't see my self doing any more big block projects so here is a set of pulleys. From an ac ps motor in great condition. I primered them thinking I might use them. $40 SHIPPED in the 48 from Bristol, TN 37620. Thanks FABO

2nd in line for the solenoid if it doesn't work out.

Don't they have a cross over tube to heat those choke wells?