Search results for query: *

Thanks I'm new to this.

Thanks I'll try it .

Thanks for the help

What's a good cam for a 71 340 with a eldebrock air gap intake and 650 edelbrock carb. 8 3/4 rearend and 727 automatic stock exhaust limited budget just for street.

thanks I'll try that when I get a chance went to Mopar show in San Antonio Tx. We had a good turn out sold some parts but am tired out Thanks Mopar friends.

Thanks for the response when I place the new o-ring on the tube I slide the filler tube into the trans and in only seems to going about and eighth of an inch passed the o-ring and then the bolt ear lines up with the transmission and engine. If I slide it in further then the ear doesn't line up...

Does anybody have a transmission dipstick and filler tube for a small block 727 with a 340 every filler tube I get is to short and leaks My trans is a newer 80's small block tranny is this the reason why?

I only need the drivers side pivot mine is stuck. for a 1968 fastback barracuda. I am older and don't understand how to use pay pal but if you send me a private message with your address I can send you a money order asap. we just put a 340 in it and can get it inspected to drive it.

do you have any more wiper set ups I need one for a 1968 plymouth barracuda?

Do the wiper pivots move freely If they do I want them But I dont know how to do pay pal but if you send me your address I will send you a money order

Where on line can I find this manual?

I recently rebuilt the front suspension on my 1968 a body barracuda fastback but my alignment guy says something is wrong because my torsion bar is rubbing on the tie rod. First he said it was my center link was put on backwards is it possible? Now he says he can't get it to align right that it...

thanks for the advice I ended starting up the engine then drove it to the Muffler shop sounds prettiiiy flow masters. I rebuilt it myself haven't rebuilt In a while but anybody have a filler tube and dipstick for this tranny I couldn't find a good straight one and this one leaks or it wouldn't...

I will check tomorrow and see what bearings were used because I didn't buy the moser green bearings and it is a sure grip. Thanks mopar friends.

I bought some moser axles shafts and when installed one has 1/2 inch play and the other 1/8 inch is this normal or is my mechanic screwing something up

I'm putting like a 80's model tranny in a 1968 fastback with a stock 340 everything fit O.K.

I wanted to tow my recently overhaul engine and transmission but havn't start the engine yet and dont have mufflers or pipes just exhaust manifolds will it be to loud I have one of those neighbors but if i tow the rebuilt tranny can i damage it...

thanks that was the problem I finally got a chance to switch the calipers and wala I got brake pressure now I can take it to the muffler and alignment shop Thanks again Hemi71x

No I didn't know that thanks I will switch them around tomorrow. I will let you know what happens.

I have a 1968 fastback barracuda that we just placed a 340 into and want to start up but can't get the brakes to build up pressure after 4 different master cylinders. We pump up brakes open the bleeder valve and air comes out but then when we let off the pedal for a time the pedal continues to...

how much for the trans dipstick and filler are they for a small block 727 and would you just sell the down pipes?

hey I need a set of the exhaust manifolds I purchased the torsion bars from you my sister lives in Corpus she can go pick up a set Let me know if you have a set for a 340 small block

today I tried to prime the engine but the oil came out of the 90 degree adapter I tried both gaskets then one then the other and also smashed the bolt cork gasket trying to get them tight but still leaked out. I'll try to order the gasket kit you recommended.

which gasket should I use for the adapter the kit has two one looks like the air cleaner gasket and the other looks like a peace sign but it seems when I only put one it is still loose and what about the bolt does it take a cork on it? the engine I am restoring is a 340 which is going into a 68...

Will a 8 3/4 chunk from a cornet 440 fit into a 2070741 housing for a A-body barracuda 1968

do you still have the lower ball joints and are they for disc brakes?

Ok i'll send the m/o for the harness

still waiting on your reply to send money order for the wire harness only

Hey Tony I need the harness I still have your address I bought the bolts from you recently I'll send you a money order again by the way the bolts worked great

could I see a picture of the center link I'm doing a swap from a /6 to a 340 and need the center link that drops about 2 inches