Search results for query: *

Does anyone know the Bilstien shock ID for a 1967 formula S Barracuda?

The last one came from Napa. I'll see if the Dodge dealer has one. They seem to be clueless when asked about older car parts. Good suggestion !

The sender is the gauge type..a dome type. No way could you use a socket.

I'm on my third oil pressure sender, they seem to last a few thousand miles and then start to leak. Does anyone know of a bullet proof sender??? Newly rebuilt 360 roller with a Melling standard pump. Cold oil pressure is 72 lbs at idle and 28 lbs when hot. I broke it in on regular break in oil...

They are still a little noisy compared to regular rockers. I'll be adjusting them next week and see if that makes any difference. You only really notice them with the hood open and it idling. The engine seems to like the combo, it has a ton of torque and revs well.

My heads were only good for .510 lift, I think you might want to check the max lift on yours. have you bent any pushrods?? Something is way off, I get tons of oil to the top end. My cam's lift is .460 with the Chevy roller rockers and using stock Mopar roller lifters. The contact patch on the...

Yes, I just had the car out today. Sorry about the mail box, my wife passed away a while ago and I haven't been on here much. Question, what was the problem you had with the lifters??? I used a roller cam from Bullet and it works fine for me. I did go to adjustable roller rockers to get the...

YES WE DID! Wollensack reel to reel and a turntable feeding a 100watt amp. Sgt Pepper was just out, one of the guys was sent the record and we copied it. C company,125th Signal Bn. 25th Infantry Div. Cuchi Vietnam..1967

One more pic

GR5-4394, you picked up the headset and the operator said "Number Please". I forget what our ring was...maybe two long rings. We had 10 party lines. Cyclic ringing. 20 cycle, 30 cycle,40 cycle 50 cycle and 60 cycle. The 60 cycle ringers would hum from ac power feedback. I worked 38 years for...

MediceMfg ...Valve Cover Spacers - Mopar Expensive but it will do the job! Top is for Magnum and bottom is for LA motor

I think the single piston started on the 73 and up cars. If it's bone stock I would think it's a 4 piston Kelsey Hayes setup.

Any of the above will do fine. I bought my parts over the winter while I refurbed the Kframe. I had some problems with the new Idler arm, it was sloppy! I'd tighten the bolt and it would be fine for a bit and then the play was back. Pulled it out and the bushings we're fine. It finally turned...

I'm in the middle of rebuilding my brakes, new lines, calipers, rear wheel cylinders and master cylinder. The master cylinder seals went and blew debris into the valve on the frame. I have the rebuild kit, but it must cover a few valve blocks. Mine is stamped 347-B, does anyone have a diagram of...

And he looked up a hooker??? Sorry, I just couldn't resist..LOL

Yeah, that's my problem too! Got to find a girl friend

CC one chamber in each X head, you'll then know the chamber size on them. After you replace the old heads clean a chamber and cc it. I bet they are within 2 cc's of each other. The ported heads will be a improvement!!!!

I was sitting at the bar staring at my drink when a large, trouble-making biker steps up next to me, grabs my drink and gulps it down in one swig. "Well, whatcha' gonna do about it?" he says, menacingly, as I burst into tears. "Come on, man," the biker says, "I didn't think you'd cry. I can't...

Here are some pic of the heads and the intake layout. Some pics of the intakes that are available for it> Notice the intake runners are very different..

Here ya go, just a few more thoughts

327/331 chevy, just the best! Almost as good as a 340

Autorotation, it ain't pretty but it'll get you down. Saw it used twice in Vietnam.

What size brakes does it have? How about the torsion bars? Did you look for the torque boxes?

Look for the bigger torsion bars ending in 892/893. What is the fifth letter on the vin...E? 8 3/4 rear, is the frame re inforced. Look for holes in the front fenders just in front of the doors for the badges.

Have you checked the index on the drive shaft? Mine was off after I had it shortened. I had a speed related vibration too.

What condition and price?? Shipping is to 08848. Do you take paypal?

I'm looking for a fuse block for a 1967 Barracuda, part is marked 2497964

It's all back together now, I had a few problems. I found the Accelerator pump problem right away, it has a weighted needle valve. The one in there was too long and wouldn't let it open. The second was none of the gaskets for the venturis bases matched the old ones.. The ones from Walker almost...

Thanks Rusty, I'll check them tomorrow.