Search results for query: *

Oh, He's got You alright, lol!!!

"Sooo.....this strip is warmer than the concrete, so what?"

I run two 340 motors in my toys. One was built in 87' the other in 89'. When I change the oil, I always have that gray slime on the drain plugs. Maybe not as much as yours, but it is there, 35 years. I think the motor is still in the break in phase or you may be getting a little moisture in the...

Still hoping they are found. Tom

What size is it across?

They laid like this for over an hour......until "I" had to get up to go pee. They're always bombardin me soon as I sit down. lol Look at Clyde. He always lays with an arm throwed over mine. Kitty says he's showing possession.

I'm not an engineer, but you can search the Internet and find issue after issue the the Mopar magnetic pickup and not with the Ford Duraspark or GM HEI pickups when used with EFI systems. I recall something about the amplitude variation or the small cap letting spark disrupt the signal. It's not...

Seller claims it's been on process since June.

They're a tight fit. With no lube, they will distort.

235-60-15 rear, 235-70-14 front

Brewers?

It's not all the bad rails, rockers, trunk floor and most of the body is rot free. It's just in the roof and front pans for the most part.

Ok, thanks, I'll try again tomorrow.

Save the money and make your own brine. No need for the buttermilk. Add some spices and herbs to the brine. It has some scientific term. The Salt drags the herbs through the bird. Osmosis?

Correct

I sanded mine starting 100 and worked my way up to 1000. Then buffed to a good gloss. I used a Makita electric palm sander which leaves oscillating sanding marks which polish out easier than straight sanding marks.

Vaseline works great too!

I put them on the tube first, LUBE them with some penetrating oil and they go right in.

I had no idea that they had transfer tube seals. I only remember the o-rings and lubed them with vaseline... no leaks, but that was about 25 years ago.

Yea I think it is and going to keep doing it.

BTW, i went to a local auto parts store today to get some new o rings which they didn't have, they did have the seals though....32 bucks!! Fortunately i still have the two new ones from the kit i never used but being how expensive they are i don't want to damage them!

Just tried peeking in behind my fuse box on my '69, looks like I piggybacked to a spade on the back side of the instrument fuse.

It is yes, so do you install the seals on the tube and push in or install in the bowls first? If i put on the tube first then they bulge out and don't want to go in the holes in the bowl, if I put them in the bowls first the tube dosnt want to go in even with dishsoap as lube they seem very tight?

Bump

Bump

I hear that works well with wild meat too. I think its mostly the sodium.

Hi Mitch, doing very well here. My 2 companies that I founded 3 years ago have been exceeding all expectations and I am enjoying life. The substantial money flow makes life quite a bit easier. On a personal note, I am still holding the 100+ lb weight loss and still even slowly losing more...

I did a chicken breast that I soaked in buttermilk the other day and turned out nice and tender.