Search results for query: *

OK, Here what I just found. I'm going to give you the picture of what I have found. Let me know. Thanks....................Ted

Praying for you John.

think I`d adjust that firewall about 1/4-1/2'' before final assembly/hammer .

Clarifying my own post, just in case! Is there any way possible to mistake a 340 balancer for a 360 while it's on the engine? Done, and thanks.

Okay, I know that the 340s had a mid year switch that went from forged to cast crank, and that each one had its own respective harmonic balancer, one of which was stamped on the back. Now, did the la360s all have the somewhat distinctive thick balancer with the sort of semi-circular groove...

Old Dodge truck guys.... Is the W series the same as being a Power Wagon (or vice versa)?

Getting things lined up

Just buy some honing oil, your parts store should have some. I don’t like using penetrating oils, fumes.

Wow. A console, hood scoop 74. Does it have the fold down rear seat? If it does all it’s missing is a stick and a sun roof we’d have sister cars. Very cool.

Grandma’s kitchen was the same way 4”X4” black and white tiles made my eyes go crazy every time. Don’t know how she liked it.

How much material are you removing? In a pinch I’ve used solvent. That’s a bottom of the barrel choice but it’s a step up from dry honing. I’ve used ATF, Marvels Mystery Oil and even WD-40 if it was just a slight touch up. If you have to remove more than about .001 I’d let someone with a...

Why yes old boy you have hit the nail right on the head> What were we all thinking. Yes FREE BEER is an excellent kind of beer. I used to go to this little bar. The Westside Lounge in Watseka Illinois. It was right in the middle of downtown and certainly wasn't a lounge. There was a sign behind...

I used to drink my share , (more a few times) , I always could smell Budweiser when some one opened it in the room , smelled like yeast to me ... Dont drink much anymore , but have always liked the smooth taste of Miller hi-life / Miller time >>>

What I did, and would suggest, Take the front gasket, fill the channel that goes over the pinch weld with black RTV. A real good amount especially in the lower corners. Place gasket on the car, holding the top in place with blue masking tape. Let sit for a few hours, like 4. then put glass...

no kidding, i got a headache just looking at it reminds me of the hallway in the farmhouse i grew up in, that had a real grade to it (probably only a few degrees, but very noticable) it had a black and white checkered pattern tile floor coming home drunk, id ride that south wall the entire...

Back from the dead.. Nobody has had their eyes on this thing?

BUYING that all done!

i love these old cars..so basic and straight forward.....backyard mech's are a dying breed Im afraid. i look under my wife's car and all i see is plastic and wires!

pics of the bolts please.

There was a Canadian I used to like called Calgary Amber Lager. Haven't seen it in the states for years and I mean like 30 years...but remember 30-40 year sago there was no craft brew good beer to us in the states were the imports. And I wouldnt even say Good is the word but variety. These days...

agree, I turned down $36,000 on my barracuda , because it needed wiring ...had it rewired due to a health issue at that time .

Here's a threads you might want to read. Steering ratio doubler advice.

Because the screw that fastens the distributor down is confined in a metal slot. I've got it as far as it will go. As I said in my original post, I was thinking about lengthening the slot so I can go further. Would you like a picture? What is CAP?

Tom Hoover once said , in a Chrysler drag seminar in OKC , that cam bearings can look like hell and never give a problem . I suspect there are a lot of them replaced that don't really need it , I have never worried about them unless the block has been vated ...

I put in a 1 wire alternator, built in regulator on my scamp. Not too many wires under my hood.

I sure hope this thread doesn't get derailed again, like most of them do on this subject matter. For those actually interested in the content I'll provide an update on the car with real data, not speculative. I get it that most that disagree aren't educated on the physics required to actually...

Love these old stations

never had a cam with laminations on the lobes either ...

# 20 Bell pole ......

I`ve run all kinds of full hose over the yrs. , never had an issue with any of them , have both PTFE and regular fuel hose , ''and'' fuel inj. hose on this one =o problems here either !