Search results for query: *

[FOR SALE] - Mopar 727 SM Blk Transmission with Turbo Action Automatic Shift VB It looks like the guy who F,ed my trans up twice and Chris's as well.....Maybe not, but in the right location....

Can you tow a cart with aux water, occasionally pump from reservoir in cart when engine temp rises. Fuel transfer pump should last, but might not prime, submerged marine pump better . Try "right stuff" to plug/slow leak. .

i'd maybe fit a higher pressure warning light sender. i know they're available here in the uk so there's no reason you should have issues sourcing one in the states. with a stock sender by the time the light comes on it's usually too late, unless you're just idling in traffic. and that assumes...

Pushrod measurement. I’m not quite sure how to accomplish this but took a rookie stab at it after watching numerous videos. I used the comp cam measurement tool. With the tool installed I bolted down the rockers. Not torqued. I then made sure that lifter was bottomed out. I then spun the tool...

I picked up a 2012 5.7 cheap, the owner had the motor in his truck replaced because of a misfire. I knew exactly what I was getting and what to expect. However I've never seen one this bad

$5.00- $30.00 plus shipping

add some self adhesive underfloor heat shield (like you put to keep exhaust heat at bay) to the underside of the plate. just leave out the bit where it contacts the gasket/manifold. neil.

Shim kit has arrived and after a few more hours of shimming I like where I’m at. They look near centred and I’m moving on to other parts of the build. Things done this round. Oil pickup installed Oil pan with windage tray installed. “Issues” Water inlet with 195 stat installed. Temp sensor...

I wonder if a cheap boat bilge pump might be a better option.

Fred, I went through that ahit. The ear doctor said your brain will eventually filter all that out ! I figured why pay all that $$$ when my brain already did that. And besides, still couldn't here low talkers or conversation on television.

Pm sent

:eek:

Good day everyone and happy Friday! I've been running my small block with the so called "idiot light" for a couple of years now with no oil pressure gauge. My engine is a hi-po 360 LA that I had professionally built in 2020. I ran a mechanical oil pressure gauge for awhile just to ensure...

I think what he's saying is the explodes tag pinto needs the flame job paint work. Would make the total package.

Here’s the radio section on my rally dash frame. 70 340 Dart 6/23 build date Thumbwheel radio

Smaller engines definitely can use more gear, even very mild ones.

Yeah...what a pain! If ever again, it will be a chassis, on a chassis table/jig and paint. Then skin the body on later

For those who have purchased a 6.4L 392 485hp. Where did you buy from? Who sells them? Only Roseville? I tried my local Dodge dealer, they said they don't sell the performance parts, they pointed me to Mancini or Roseville. I don't think Mancini sells crate engines.

I'm hoping someone else might used one of these to pump water. I can get a 12 volt pump for $25 and need it to live for maybe 2 hours. The pump instructions all say the oil being pumped is what keeps the pump lubricated. I'm trying some backwoods engineering to run an antique tractor in a...

Looks pretty good Eric, crazy angles and all can't be easy and looks good to me!

Hopefully the doc fixes u up. Hopefully Hemi responds well to the meds. Kim

I believe my big block sft springs are installed at 1.940 and that's a seat pressure of 150# and 400# open. Edm lifters

It should have 2 coats. May have to top coat the underside with something else

Buying the covers from Legendary is one thing, but I would have a local shop install the covers correctly. Maybe install new padding as well. If you have a local shop do all the work (I did 35 year ago) be sure you have the old covers for a pattern and material match. My shop did a great job...

Looks like a pretty nice **** show

All he'll need to do is fertilize the wheels and they'll grow to 15s

My tires are 15’s not 14’s. Let me know if that can work for you.

Go with the cauliflower!

Finally Cat Scan day. In the waiting room to be called I’m for test. Hopefully we find the issues causing this pain. I was actually starting to feel good enough to consider trying to go to the Halloween race at Quaker City in Ohio but Hemi is requiring 4-5 meds some twice a day and have to take...

Impossibly Easy Vegetable Pie Making this today.