Search results for query: *

It helps to know what you're looking for. https://www.summitracing.com/parts/zzz-mu1525-1/make/dodge/model/dart/year/1970

Sorry to hear about all of this John. I’m praying everything works out for the best. Kim

440 engine, 456 with 8 ¾ rear end, 4-wheel disc brakes, new front & rear tires, new TrickFlow intake, 4 barrel Holly carb, 727 with reverse shift valve body, Hays clutch discs, trans brake, Champion all aluminum radiator, original glass, steel deck lid, fiberglass lift off hood. Solid 11 second...

I'm planning to shave the moldings on the avatar '63. I'll probably only leave the Dart script and GT badges. Do it. It'll look slick, and life is too short for boring cars.

It doesn't matter when you loose the LCAs. It only matters that you not tighten them until the car is at ride height. If you loose the UCAs, you will likely lose your alignment, so I would not do that. Some aftermarket BJs are extremely tight, and will sorta "stick" which will cause wandering

If you hand signal, you're perfectly legal. Also, when I build and drive hot rods, the opinions of the government are not often on my mind......

Needs a paint job

Both ends measure 0.240.

Wow what a rebuild..................... Hope everything comes together for you. I am hoping someone on here can direct you to a re-pop wiring harness or the likes. I hate it when some clown with a pair of wire dikes thinks he knows more than the factory did. Bummer ..... It all looks good to me...

Morning

What are it's dimensions? Outer dia? Depth?

They look a little ruff for being new. Why are the plugs in, with the heads off?

Is this the switch you bought?

Great story and family. I ask the Good Lord for a full recovery.

If you are running so much Idle-advance as to affect the cranking, my guess is that the Transfer slots are gonna be nearly closed too, just so it will idle slow enough. That's also gonna lead to long crank times as the engine struggles to get fuel, and whatever it does get, if it ain't burning...

Yes it is. I've had a few cars that I've deleted front signals from. Heck, pre-1955 they weren't even required equipment. But I don't particularly consider what the government wants when I put a custom car together. But again, they can just be mounted behind the grille so the light is still...

Pull the plug off the switch, stick a jumper wire into the plug terminals. Turn on the key, you should have reverse lights. If you do it's a switch issue, if you don't it's wiring.

Already got one, thanks anyways.

I don't know about all of that, but I can assure you from having several 273 4 speed early Barracudas that the Mopar engineers hit a home run with the drivability performance of a commando camshaft. They basically already did for a 273 2bbl what you are wanting to do now. No need to reinvent the...

Is it an optical illusion or do the frame connectors have a slight bend in them, on Butch's car?

...This will depend an awful lot on the cam, the compression ratio, and the ignition timing. If you have to retard the ignition timing like I do, to 5*, then the entire bottom end will be weak. That's quite a lot to have to think about. BTW-1 for your application, I find no fault with your...

I've been running the Autometer one for a couple of years now. Seems to be better, but far from as good as I hoped. Sometimes it just seems wonky. Drove into town last weekend and was showing a 1/4 tank. Didn't seem to move all the way in (30 miles) and was fine when I started back. But...

Truth hurts

sweet...it doesn't get much simpler than that. On or off end of story. If you have power to one terminal blade you are home. When the switch becomes true that voltage will cross the closed switch to travel to do the work of lighting the bulb. If that switch closes and power is present on the aft...

Interesting idea. Biggest flaw I can see is that you are assuming how much gas you have in the tank and having to remember how much you put in last time. It could bite you in the end if things get out of whack and you think you have 13 gallons of range but you only have 10. At the same time...

A little late, but I thought I'd throw this up here for what it's worth. You can get a general idea on a tires dimensions by going to any one of several sites on the internet including the tire stores. The sad truth is that while the dimensions are close they are not exact and can vary in...

What a **** show. Not set up for this, too many obstacles, paint isn't going as far as I had hoped. Hate this. Engine compartment, trunk amd underneath all has 1 coat. And so does everything else I own. Poor planning. Phuk it now tho