Search results for query: slant to v8

I have a brand new Schumacher creation swap engine kit from slate 6 to340 /360 new in the box $125 plus shipping from Crossville Tennessee it comes with instruction sheets everything to do it with brand new

if you *really* want a V8, then at least that's a convenient way to get all the V8 specific parts for the swap. but unless it's a commando spec or already hopped up 273 it's not gonna be all that much better than a warmed up slant, and any hot rodding to the early 273 is going to cost more...

This nicely sums up my thoughts as well. I am well aware building a slant over a V8 is no cost savings, gets you less performance, and is a lot more expensive to hop up. However I can't help but like them, have built two, and intend to drive them till they drop.

It is a 1967 Plymouth valiant 2 door, previous slant 6 3speed ,

65 A body torsion bars, generally: .83 slant six .85 standard 273 V8 .87 Formula S and anything else with rally suspension I'm sure there were exceptions, but every one I've ever dealt with had one of the three bars above. I put .87s in my slant six Valiant, .89s in my 65 Barracuda 340, and...

Really depends on what you want to do. If you want the car to be more of a muscle car type, the V8 is nice. If you want a great driver, its hard to beat the slant. I have both in 66 Darts. I like them both. My slant has been built enough to create some nice HP, but not radical. The 273 is stock...

Bought my first day after x-mas -78, raced it a lot, fast thing with its slant that I don't have much clue what was in it but I won over a few V8 Mustangs... never liked the ones from -67 & up so exept for a sad -75 I only had the ones from 1960 to 1966. Here's my first: (later on I put a Hemi...

The only thing about the slant 6 is, it will never be a V8. You can turbo it, blow it, nitrous it, but it will never be a V8. That said, there are some record breakers out there, but they are some NASTY little engines and not "real" streetable. Slant 6 guys build them for the love of the engine...

I just bought a few slant 6 goodies and that’s cemented the Slant for the ‘65. Going to pass these along. Check the notes on the invoice to see if these will work for you. $350 plus shipping from 95695 Woodland CA

Check out this item on OfferUp. https://offerup.co/0P7GzH45mKb Be careful what you wish for. I would be all over this if it wasn't for needing to smog it. That is extra stress I don't need in my life

Parasitic drag is real. You want to dog that slant some more, put a set of heavy 15's, and heavier rear end in. If you are planning a V8 swap( which is harder in a 63) great. But if you are planning on sticking with the slant, I would suggest some 14x5.5 steel wheels, and keep the 7.25. .02...

Yes and no, for some reason, 39-48 dodges and Plymouths just don’t sell or move fast. Even the Chevys and Fords from that era struggle to move. It’s not as bad as the 78-90 period of cars but I’d say it’s second worse when it comes to value and selling fast .

There is your answer...another car....multiples!!!!! I admit, over the decades I have had A,B,E cars, hemis to slants and all in between.. I have enjoyed them ALL for what they are!!! 20 years go, I bought a 72 Demon with a totally shot 225 slant, a bud had a totally rebuilt 225 he decided not...

**** the one in my basement i only paid about 100 buck for a few years ago.. they pop up from time ti tim here for under 200 bucks.. was thinking of selling my early A V8 parts as a package. mounts, dougs headers and the centerlink..

Check you PM for message I know you are new see pic for where to click the envelope

The 1.03’s won’t be too stiff. If the car is bottoming the suspension now it may very well ride better with the 1.03’s than it does with whatever it has now. The only “trick” to larger bars is a good set of shocks- RCD Bilsteins, RideTech, Hotchkis etc. Just stay away from KYB and you should...

Some slant 6's (mostly A/C cars) came from the factory with 22" radiators too (part number 2582929). Some had 3 row cores too, which would be even better than the standard cooling (2 row core) that came with the 273. They could be used with a V8 by changing the inlet and outlet connections (and...

Welcome. That will be an awesome daily driver. Tell us more about the car. Slant 6 or V8? AC? This is the best place in the world to get help with a Mopar A body. I love to see 4 door cars getting the love they deserve. I always make it a point to visit with folks who have a nice 4 door at a...

I hesitate to say, as there may be differences between front sump, center sumps and rear sump.. I have a rear sump oil pan, and my dipstick tube broke off.. so I got a V8 dipstick..changed the oil, so I would know for sure how much was in the oil pan,... and then scribed new marks on the...

Thanks for all your suggestions! I think im starting to lean in the slant 6 direction, as I dont think an engine swap is within my ability as a mechanic just yet. Im sure I will have more opportunities in the future to fulfill my v8 crave.

Back to "OFF" topic again, RRR. I enjoy my SS springs, with the stiffer ride and the way the car sits, but it is a mostly stock 69'.

My 66 has flat engine mount, no spool mounts, went to v8 from my slant 6, intake means a bunch and carb, but I think my hood will fit, probably don't help but I had to chime in, Schumacher conversion mounts to my 360 with a torker 360 aluminum intake to a Edelbrock carb.

In the interest of fixing everything else I noticed that there are two trans filters with different part numbers for 1965. There's one for V8 and one for slant 6, but that doesn't make a lot of sense to me. I had a slant 6 one laying around, but ended up ordering a V8 one just in case. Once I...

Do you have a picture of the one you have?

I must say that I am pretty excited to slap everything together soon. I have a set of disc brakes/spindles/UCA's from @themoparman73 and the 7 1/4 rear from @AbodyBB. I had planned on popping in a set of 1.03" T-bars, but now I'm worried they'll be too stiff with the slant. It's the wife's...

I've got the same set-up as you have, but not installed yet. The carb I have is off a 1966 273 v8. Should work great. There is even a Mopar high performance manual for these slant 6's. That manual recommends using one of these carbs from a 1965 to 1967 273 v8 4bbl. It also gives recommendations...

Should be a nice project car. Lots of questions. Probably 273 2 barrel 904 automatic, with 7 1/4" 3.23 ratio rear end (cover on the back). Would be real lucky if it had an 8 3/4 rear end in it, heavy duty, with the smooth back. Already set up as a V8 Automatic car, so that is a lot better than...

For that price, I think I'll sell one of my NOS ones........:steering::eek:

I took apart 1965 D100 and 1968 D200 slant 6 to get parts for my 1967 W200 (Small block V8). In both slant 6 engines, the bell housing curved beyond the slant 6 mounting surface with exposed bolt holes, so it could be used with the small block V8. The W200 did have the NP 435, shifter on the...

Im wondering the same thing the wires are in good condition overall but there are so many things not plugged in I’m just trying to get more electrically back from the car.