Search results for query: *

I used socket cap screws and turned down the heads for my tail light bezels. you can probably find the correct ones if you search hard enough.

Is he out of Brantford Ont?

Mopar Performance book P4876826 page 217 says 9/32 plus .000 minus .050 maximum. Pushrod length is critical for two reasons. One is if they are too short or too long the oil coming out of the rocker won’t hit the adjuster and run into the cup. Pushrod length also affects rocker ratio. The...

I am not really sure what our GnF Dept was thinking on this new regulation. Sounds like they are trying to reduce the herd size a bit due to the CWD issues. By changing the muzzle loader season to alternate season it really opens up a lot of extra days for in essence modern gun. Long as it is a...

So, would there be an advantage to destroking a big block, like 400 to take advantage of the bore size, or just use a 360 or 360mag. The 400 could use Max Wedge ports. Does the same opinion hold true when considering boost? This is for my Bonneville effort. The class I would rather be in...

You guys are smarter than the average bear. (Yogie Bear) I saw this thread and went to answer as I figured nobody would know this one. Wrong. The people on here are just Great!

Well it's Monday morning and time to head north about 4 hours. Just reflecting on our trip so far and all the changes it took. We left home a week early so Theresa's Mother could go visit her sister in Atlanta, her trip got canceled so we just stayed with Theresa's family and visited. We...

Ok,I’m just getting mine re cored thx

Just three days ago, we worked a house fire that appeared to have originated from HVAC wiring in the attic. Flat roof with about 16" of space between the interior ceiling and roof. The fire was still small, but making a run in the attic space. We HAD to pull lots of ceiling and cut the roof to...

30A 115V is typical for a camper hookup.

Just don't cut the green wire or push the red button that says "Launch". :)

Where is the oil feed hole to the pushrod in that rocker? Also using fractions and not threads how far down is the adjuster? I’ll go look up the exact Chrysler measurement.

Let me look, I should have a couple Rusty

The operating instructions should be found on Google. It appears that you have two separate 125 volt circuits based on the reset buttons and that pole plug would be used for 220 volt applications. I agree with YY1 in that there are ways to power your home with a generator if you know what you’re...

I built a muzzle loading derringer from a kit long ago, just for grins. We took it to Colorado during deer season to test it because we knew there would be snow on the ground and less fire danger :lol: Yes, the muzzle flash was impressive :lol: and I swear you could almost see the ball...

Hay Ben/Ricky!! Safe travels back home after a long stay down there my friend The arm = Temple, I learned a bunch from an eye dr that had his own glasses made in house.

The receptacle says 30Amp 125 Volt. Get a tester and check it while its running. At 1st glance one would think 220 but I don't think so.

Thanks Hoppy, and yes, word of mouth between buyers have been a blessing for us

No hurry, pics would be nice to refresh my memory! We'll have to make a special trip for it .

Edit because I didn’t read this correctly.

Very good :D They have some very good brewers and distillers south of the border.

video

Is it good or just cheap?

I used to make special trips to Tijuana for that Oso Negro 100 proof. It wasn't imported back then and the in-laws were living just on this side of the border from there.

You can break that out into two 110 circuits. Or you can run a welder, etc. You can even back feed your house panel if you know what you're doing.

as requested

If he does not have it they dried up.

@Ben Drinkin Have a safe trip and an for me :D

Mobileparts is our go to guy for brake and suspension parts.

I'm aware that it's 220 What are the applications for it Was told it's for marine application