Search results for query: *

What did you get?

Rye...Eh....

My Scotch issue is that I really only enjoy the Islays..... Which makes me a bit of an outcast in most circles

I got no problems with that at all. You have been quiet and just wanted to make sure all was well. Glad it is!

Depending on the RPM that let loose, I'd be concerned with valve to piston issues.

The good thing about 'Scotch' is that is must be by law distilled and aged in Scotland for at least the first three years of it's life. :thumbsup:

That hooch is probably chocked full of Maple Syrup. :rofl:

I need to get out more and check out as many different events as I can. Time gets away from me too quickly these days.

And he didn't have to go in for a touch up every 3 hours

I remember when I first bought my house and set up home owners insurance they suggested I take a picture of each drawer of my tool box as well. Expanding on what others stated, imagine trying to remember each individual tool in each drawer. Seams easy right now, but I am not under stress or...

Life's Good! This is the only progress for a while... ;-) Polished and waxed our 5th wheel... front, back and one side. One side to go. Polished up the windows too. Had some good winds here last Sunday. Looking out the window of our 5th/W. Had some gusts up to 40+ MPH recorded on our...

I have the dump truck rear in my Duster (Strange S60). I like the strange over the OE as it has side adjusters instead of fighting shims. I’ve got 4.56 and my 4.30 gears set up on spools and with the shim packs for the pinions it really doesn’t take that long to swap. I also have 4.88 and...

Ya missed the "cold" part. And the Zappa reference...

post the beginning of your Vin here for info

Rodin sculpted "The Thinker" with fewer tools than that...

Iron heads is what I got. Is that at ambient or at running temperature?

There are 2 different trans levers, one for 4 BBL and one for 2 BBL. The length is different as the ratio on the z bar or the carb is different.

Congratulations Padres. California series here we go. @Mopar Tim Be great to see San Diego take down LA after how they've stolen all the CA teams

Well, "Down in Joe's Garage" we set 'em at .020 cold and tweek them from there. That's with iron heads... aluminum slightly more.

No Zelle, but I have paypal.

If you look at 69 up rear backing plates, they have 2 tabs on either side of the wheel cylinder. My understanding is they are there to keep the pistons from popping out until the shoes and springs are installed.

66fs, Thanks very much. Now I understand how the ball could fall into the box, I'll follow your advice.

The residual pressure valve was designed to hold enuff pressure to keep the wheel cyl cup "lips" in contact with the cyl wall, to prevent fluid loss while not in use, - was what I was taught, and was in my Red Seal Manual. Look it up . Newer design wheel cyls came out with the spring, originally...

Should be able to make the dime-a-dozen factory Mopar 2 bbl. linkage work, once the throttle cable is located properly to the carb lever.

Yea I bought 2 of the Harbor Freight 4375 generators a few years back and homemade a long 14-gauge cable with a 4-gang outlet box to keep the refrigerator and freezer running and AC in 1 room of the house plus a few lights, only had to use it once (knock on wood). I like the redundancy of having...

Wish I had some new news but we got a new puppy! Between the new puppy (I am in Full time training mode), some home improvement projects and summer camping season (RV camping) I haven't really touched the car in months... "¯\_(ツ)_/¯" Plus our RV season is extended through the end of October...