Search results for query: 66 barracuda

I was told that the 65 and 66 seats were different. The 66 seats are narrower than the 65 seats, because of the console. I am putting a 66 console in my 65 barracuda and wouold like to use my 65 seats. would they fit? Or are the 65 seats to wide. Does anyone have any experience with this type of...

I am trying to decode my 66 barracuda fender tag. I hardly has any info on it. Can someone decode it? Thanks

Your in box is full. I tried to contact you.

In box is still full. You might want to give me a call.

I have the original radiator from my 66 Barracuda V8 automatic car part number 2582931, these were also used in the A/C cars. My plans were to have this rebuilt and reinstall in my 66 but it never happened and my car was sold. It will need to be re-cored the tanks and side brackets are in good...

Looking to my ABody Friends for a little help, I’m rebuilding a 1976 360LA engine to put in my 66 Barracuda. I found an era correct Mopar Viscous 5 blade offset clutch fan that I would like to use on this engine. I’m having a problem finding a replacement clutch where the shaft of the clutch...

The hardtop and convertible are the same though.

The upper quarter panel spears are aluminum on the '66 Barracuda also. You can use those and the 4 door ones on a convertible by cutting off the excess length on the rear of the molding. The '64-5 Barracuda uses a stainless one, but the width and contour is different and won't engage the...

Very nice! Great job Rick!

When I retired I decided my long-delayed desire for a fun 60's car was going to get filled. I had a 67 Dart and a 73 Duster way back in the day, and while I like other cars too, I have a stronger affinity for Mopars. After much searching and evaluating, I decided I wanted a 66 Valiant, and...

When I was a youngster cruising around in my Barracuda there was a 66 Comando 273 conv around town. Young and no money otherwise I would have knocked on his door

I'll try to get some this weekend. What exactly do you want?

got some more speaker kick panels ready to go $134.99 on ebay 1963-66 Dart,Valiant and 64-66 Barracuda molded Kick panels with speaker pods | eBay

I have a rust free 66 Plymouth Barracuda hood in good shape but will need some work to be perfect. No major bends or dents and no rot in it. Must pick up or I can meet you halfway if at a reasonable distance and pay my time and gas. Located in Downsville, Louisiana. $200

They look great! I am a fan of the 66 67 style for the Dart and Barracuda myself.

Since that's a 68 Barracuda and if you want to be correct...use 68-69 B body seats. The 66-67 will work, they just have a hard shell back and a little chrome trim strip. The rails however are a-body unique, ones from a 67 Barracuda (or Dart) WILL work as well. Just need to swap them...

I'm pretty sure the zbar from 1964 to 1966 are all the same.

My 66 Barracuda had the frame mount for the Z Bar fail back in the 1970's. The mechanic back then welded a patch to the frame and it basically works, but its not in exactly the right place. While it is on the rotisserie, I want to address this and bring it back to the as-designed state as...

Not with that particular dash. I had my entire facia from a '66 Barracuda done (no gauges, just all the dash plastic pieces) with Gcar, and it was expensive. Approximately $900. Looks great though!

As a guy who has a highly modified 273 commando engine in my 66 barracuda with auto and ac. Mine has a factor radiator and fan shroud and clutch style fan. No issues getting hot. I tried the aluminum radiator route and honestly it had a tough time like yours does. I’m not saying the aluminum is...

I probobly have a lot of what you're looking for. Just picked up a ton of 64-66 Barracuda/Valiant parts. I'll be going to my storage next week. PM if interested.

Good morning everyone Im looking for a nice set of passenger side drip rail moldings for a '64-'66 Barracuda. They are circled in blue in the below photo Thanks in advance ** Not my car in the photo

1960-66 Mopar Dodge Dart Lancer Plymouth Barracuda Valiant Gas Cap Stant G27 NOS | eBay

I have read the engine removal thread for 273 V8 and manual trans. here ( Engine Removal ). I have a 66 Barracuda with stock 273 4bbl and A-833 and it is being disassembled so hood is off, radiator our, fenders off, etc. I am doing an "out the top" removal as we have to have it rolling until...

FYI there was no "Super Commando" Thanks for the share.

Back in January I started reupholstering a set 66/67 Charger front and rear buckets and buddy seat to see if they’d sell at the Nationals last week. They didn’t so I decided they’re going in the 47 since they got new foam and the new upholstery. I’ve got a gold 65 Barracuda interior I was...

Nice thing about the 453s is they fit just about ever model Dodge Challenger (70-74) 273-360 Engine, Charger, R/T (66-72) 273-360 Engine, Coronet, Coronet Wagons (62-72) 273-360 Engine, Dart (67-72) 273-360 Engine, Demon (70-72) 273-360 Engine, Super Bee (68-72) 273-360 Engine, Plymouth...

Just saw the ad, 12.13.23. Someone in the Bend, Oregon area is selling a back glass for a '64 - '66 Barracuda for $600...... Here's the Facebook link...

This was the starting point. The eventuality will be what I call the car that should’ve been. A 1966 barracuda convertible. I know the purist's among you will not like the idea. My opinion is that Chrysler should have done this in the beginning if the plan was to actually compete with the mustang.

I am looking for the two interior corner trim pieces at the rear window bottom