Search results for query: *

I'd go 1.03" and never look back. With radial tires you still wouldn't be oversprung. A 1.03" torsion bar on an A-body works out to about a 215 lb/in wheel rate. Which is in the ballpark for most modern econo-boxes, and lower than most performance oriented cars. A good set of shocks would be...

i think that would fit the bill nicely for what he's trying to do. a 2004R could probably be spec'd out to take the abuse with the bonus that it's a relatively small package comparison wise.

Richmond still makes some high HP manual transmissions. https://www.richmondgear.com/auto-parts-product/?crt_formKey=keyword_search&crt_pathparts=Complete+Transmissions

kelsey hayes 4" bolt pattern. rotors with hubs,rotors no good but you will need the hubs,spindles,upper control arms,ssbc brand 4 piston reproduction calipers,everything is used condition,400.00, PICK UP ONLY Oregon Ohio 43616

I'm sure Don would be impressed. But yes spread the word far and wide on these people.

Mopars? Consistency? :rofl:

Anyone going to Garlits should wear a t-shirt stating he's a douchebag thief.

New models released around the first of August.

I had a granddaughter that was and escape artist, no amount of locks / latches on the door could keep her from going outside. I would go up to the garage, and within 5 minutes she would be up there with me, I had 6 latches just on the outside screen door, and she figured out how to get them...

Well worth repeating this to get the word out. The guy is a crook and very questionable business practices. Alan

I could use a set...

We'll try again in the morning. Spontaneous opportunity and we'll try to cash in on it. Car has been sitting, not how I wanted to race it but so what... Hopefully tomorrow we'll have given the low dollar 318 it's last hurrah!

Lunch. Texas roadhouse.

Looking for ad were guy was looking for drag he could put his engine in and go!! I lost the thread and I could have exactly what he is looking for. Nice 68 Notchback that is priced very well.

they clip into the frame rail from the outside just ahead of the K and kinda just dangle down. if you look under there and see the metal splash shields, these go in the next "hole" forward. apologies for the cryptic description, i don't have the car right here in front of me. i'll get a pic...

Good to see Az hangin' on to a track for a change. Lost 2 circle tracks in the Phx area in recent past.

I can't remember the last time I deleted a scammer/spammer account that was Gold. It just doesn't happen.

Good point, they may be at Garlits this year avoid them

Oct 19

Well, they have to invest $50. so there's that.

My buddy has a trans shop, most of his business comes from rebuilding the 4L60 / 4L80's, they are not bullet-proof and have issues.

The new cars came out in September, so a 67 car would be built in August 66.

the bigger bars would be a great addition. these cars were undersprung from the factory so upping the spring rate is an excellent idea. keep in mind that if you go above .920 you'll need good (read: expensive) shocks to control them. unfortunately, nobody makes/repops .890's or really...

Unless it's aftermarket steering wheel..

How much for the side markers to 84780?

This is the same story on repeat from the last time you posted. DASH PAD FACTORY – EBAY “DASHPADSTX” ALAN FOXX AND ALANA -SCAM - THIEVES

$32.00 shipped to flordia

New one on me, The scale change on the settings?

Scammers are just that.. Anyone who immediately joins and same day becomes gold member is suspect they're probably the same people posting fake pics and collecting money for parts you'll never receive.

Back from Fall Carlisle, no great scores just need 2 more plates Delaware and Rhode Island and she has all 50. Hey I saw Craig from Mobile parts he has some really good looking ball joint rubber boots so whoever needed them contact him.