Pretty sure the original 3310s were 4150, two metering blocks and v/s. From about 3310-2 on up to wherever they are now, ( 3310-23?) they were 4160s, with a rear metering plate.
Cathedral fuel bowls mean it's probably a 3310- 2 or later.
TY so much for the detailed reply. I have another stupid question. I can do duals from my stock exhaust manifolds? I do not need to change anything or get headers to do that? Once I buy headers down the line would it just be as simple as bolting them to the rest? Also the muffler I attached...
I can't tell you how many times I've had the same question.
I was under the impression that
After $ for resizing and bolts it's almost more worth it to buy new rods
I believe there's a rubber type material inserted in the bracket. They might be calling the rubber "channel". Company is legit, they're a little over an hour away from me.
Quick question for those of you who run a Dakota Digital fan controller. If you disconnect the battery for whatever reason, do the settings for the controller need to be re-entered?
That looks similar to my routing. If it is pinched, it's not pinched enough to restrict the venting. I've blown compressed air through it and it seems fine. Plus if it was restricted, I wouldn't expect to burp gasoline from it.
Below is what was originally installed in my car before I...
Then youve seen a bunch of **** screwed together by morons. Bolts can carry (small) load in shear depending on the material and the fit (friction) between parts but they are designed really for carrying a load in tension and should be used as such. Keys and keyways are a much better way of...
Do you have a shroud?
Is it possible that your engine mounts are bad and the engine is shifting under certain conditions and the fan is grazing the shroud?
If it is an automatic the flex plate could be cracked?
i was there for the green bearing wars. i fought back the hoards and naysayers, driving the detractors before their wives and children and reaping their mortal souls amidst the wails; and making chariots of their bones in the aftermath.
i did this not to quell my insatiable appetite for blood...
They are not really designed to come out
I have adjusted the glass down stop so the glass is out of the way.
with a plastic trim tool between the cat whiskers and the body to pry it sideways and another to lift it up at the same time
Those early 3310’s had metering blocks so they are 4150’s.
That is a 4160.
The early ones were about close enough out of the box to work very well on most stuff.