Search results for query: *

Any offers?

Early 70s A-body floor shift console. includes linkage, sheet metal shifter seat, one sheet metal bracket. I believe all the linkage is here. Will need some bushings, clips, & hardware. This is not a perfect piece. driver quality. some pitting in chrome bezels and shifter. glove box button...

Thought I would add to this old post... I am installing a 360 into my 65 Dart. I went to use the passenger side mount from the 1965 273 and found the same problem where the passenger side ears on the 273 are two holes in the back and one in the front. where the 360 is two in the front and one...

Any updated pics?

Pm sent

$1500 1973 340 std bore block & crank cleaned and ready for machine work. Block will need a .030 bore and crank will need .010 on the mains and rods. It comes with orig rod & main caps w/bolts, orig stock pistons & pins (Two have rings stuck), and orig rods. Also included but not cleaned are...

Thanks for the offer but think I'm going to stay with a Hydraulic cam.

I was thinking the same on the gears.. Once I get the 340 in it, some 3.55 or 3.73 was next on the list.

Any suggestions on a cam for my 340? I'm looking at ordering everything to be a match set. Such as Cam, Lifters, Push Rods, Springs, etc.. Many to choose from, thought I would get some input. I'm working with the following. stock 340, J Heads Edlebrock Air Gap intake & Edlebrock 600...

I bought this set. /6 to 360 and posted a few years ago. Summit had them for $60 made by TransDapt http://www.forabodiesonly.com/mopar/showthread.php?t=156115

Sure, I would buy it. I paid 300 for one, carb to pan last fall

I bought a set 3 years ago for my 360, so far they have worked fine.

I thought I would bump this post. The Tran-Dapt 340/360 to /6 k Frame mounts I purchased from Summit in 2011 and are still holding up well. $60 from Summit http://www.summitracing.com/parts/trd-4675/overview/

Don't forget to look for that 360 in an old Dodge van, camper, or trucks. You would need to change the oil pan and oil pickup tube. In 2011 I found an old camper with a 360 and built a budget engine. It had roughly 50k miles. I cleaned, painted, and added a cam, alum intake, holly carb. I...

Will a sb bellhousing part number 4202507 on a OD A833 work in my 70 Dart?

I would guess around 87 Dodge diplomat?

Bellhousing found. Thanks MOPAR4Me

Looking to buy a good condition small block A833 OD Bellhousing. I believe the casting number is #3743645. Located in Indiana, 46036. No cracks or welds please.

The mounts are still holding up well!

Tobacco companies have been marketing in other countries for decades. The Marlboro man still rides on TV across the world.

I think it sucks when American companies are bought/own by foreign investors.

Burnt, warp, or sticking exhaust Valve? I had a 318 slowly work into a shake and found that an exhaust valve was burnt. It seem to run ok above 2500 rpms, then at an idle would shake like it was about to fall apart... I could feel the power loss, and it would have like a miss to it when driving.

Nice!

I bought the Yukon axle from Mancini, it calls for B or C body backing plates from 8.75, I'm using C body 11in from a 69 fury. I would have used 10in, but try finding some in a scrap yard these days. lucky I found the C body stuff.

x2

Sounds like a lifter..

Welcome to the site! Not sure about a barracuda, but I found my build sheet under the driverside carpet behind the rearseat taped to floor board on my dart.

I've always like the bench with 4 speed best.

Im considering opting for a hydraulic clutch kit conversion in my 70 Dart.. Any suggestions or threads you can link me to would be appreciated. Also here is an FABO thread link, I'm looking for a bell housing SB 833 OD...

I have this 1971 Dart & Parts looking to make some deals in trade for a few things I need... All parts located in Elwood Indiana, 46036. i would be willing to travel a few hours to make a trade. Shipment possible on smaller things. For Trade: 1971 Dart Parts Car (Orig /6 Auto) Indiana...