Search results for query: *

Nice ride hope to see ya around

Yes you can tow it but you need to remove the drive shaft and plug the tail shaft on the trans.

PM YOU

Looks good to me also is that a vacuum operated water valve and if so would you be willing to part with that also?

Used is ok pictures would help Thank you

As long as it works I could use it thank you

Looking for a vacuum reservoir to fit a 72 duster with factory air PO removed it Thanks

how much is the shipping and could you u deliver to Carlise?

Thank you I will see how the show goes. I will keep in touch.

If you could that be would great if its not a hassle. Definitely interested in looking at the hood.

Looking for a hood to fit a 72 duster,will be at Carlisle this weekend spot G78,thanks

Thanks I will stay with it

Has anyone installed a sharkstooth grill on a 72 Duster with air conditioning?Having a small problem with the back of parking light hitting the tubing for the air condition on the right side might have to bend few things out of the way,just wondering if there was an easier way Thanks

Ck your tires could be something simple as small bulge in the tire

Try Rock Auto I got rotors for a 72 and 73 duster no problem.

I have one for a 72 duster does that help?

Got mine from Graphic Express in FL.Spoke to them several times over the phone very helpfull.Pefrfect fit.

What year would those fit?

Which fillers are u thinking about? in the rear the ones that go in between the bumper and the body?

Just as side note for the rear joint MOOG has a u joint p/n 347 that will adapt the small yoke drive shaft 7260 to the larger yoke on the 8 3/4 rear 7290 might be some thing you run into when hunting for servicable shaft

Hi; How bad are these dents?would it be possible to post a picture?do u have any other parts,ie maybe a trunk lid,wind shield,rear glass?thanks!Dan

Hi will this hood fit a 72 duster if so is still available?will be in Carisle in july 2014l

how much for the glass?

Has anyone replaced the brake line that runs along the firewall from the rt side to the left side on a 72 Duster with the engine in?Does not look like a five minute job,looks like alot to disconnect,and hopefully not bend the line to much.Any advice would help thanks

I have also seen this no drain plug my 72 duster 340 when I pulled the transmission out for the first time I notice no plug and I have had the car since 73 so I know it was original from the factory go figure!!!

Thank you for your help first chance I get I will try to trace the wires out.I am sure I am missing something simple,just frustrating.Thanks

How is it that on my 340 with a new alternator and vr that I could be reading 13-14V at the battery with it running and at the batt stud on the alt. 15.5/16 does not make much sense to me the ground is good at the vr the amp meter bulkhead wiring was by passed was going to try running a 10 ga...

You can get the connector from Evans Wiring and make your own its pretty easy its only a 3 wire 2 go to the bulkhead for the rev. lights and one to the start relay.hardest part is crawling under the car

Thank you TRANSMAN you have answered my question

thanks for getting back so soon it is a factory coverter that is in my 72 340 duster that I bought from some one else that was already built I have no idea what year the engine or the trans are.My other 72 Duster 340 that has all the original parts has a drain on the converter the factory manual...