Search results for query: *

I'm sorry I'm not explaining my situation properly. I have built a 5.9 magnum and I haven't started it up yet, it is on my engine dolly with the manual trans all together and I am at the point of putting the dist in and the plugs. I haven't bought the plugs YET so the diz is from my LA 360...

I have trouble doing pics for projects because it takes me a long time to do the job to begin with cause it's just me and the dog and my wife and you can guess which one is more help lol I had my leg amputated 5yrs ago and my elbow won't bend on my left so it will probably be a month before any...

your right and from the other motors I've done this to I've only changed plugs in 1 and it was just to put some platinums that were given to me. The champions that were in it were clean but the previous motors weren't magnums and I thought maybe someone had already experimented with this since I...

Havent put plugs in the 5.9 magnum with eq heads as was stated in the opening the bottom end is oem and the question is if the ign has been changed to HEI then should the heat range of the plug change ??? Should the type of plug change platinum,irid,oem,or no need to ????

After upgrading to gm hei coils and modules I'm very happy with results on all my motors and 0 problems, but I am currently building a magnum 5.9 eq heads and was thinking about "Well I upgraded the whole ign but I'm still running the same plugs! I'm happy with the perf of the ones I'm using but...

I know this is an old thread but I had to but in there is one thing I know it's cables (motorcycle mech) Go to either motorcycle shop or your local parts house MAY have it but there are all kinds and brands of CABLE LUBE. Take the cable out of housing and clean it and flush housing blow out with...

And thank you 72bluNblu for the solution and your help:thumbsup:

Well I'm 98% pos that magnums have the same recess in the crank if I'm wrong someone step in so if my other magnums use the spacer and roller bearing then the input shaft on the trans should be right for the bushing since it is a magnum nv3500hd . But I will check that! Just so someone reading...

Yes sir it is what the factory used and this is just a perdonal preference for me I've always used bushings without a single failure and with out fear of tweeking that edge of that needle bearing. I'm sure the factory had there reasons for the change to bearings but it wasn't because of prior...

Thanks everyone for the help the advance adapt for the amc is what I needed

2000 5.9 magnum 1996 nv3500hd putting in 03 dak

Sorry just read your last message and seen link. So this will fit in the magnum crank where the linked bearing and spacer would mount

You are absolutely right I am looking for the bushing to repksce the bearing cause the outside diam is diff than the bearing. Or if there is a large bushing that will take the place of the spacer and bearing altogether

That is what I have in the crank now, it was an auto motor out of 2000 3500van , the insert in your pic fits fine but I was informed that the pioneer bushing could be inserted to replace the bearing. So that is what I'm looking for is the bushing that will fit where the bearing is.

Thats tge part number of the bushing that I have and it is to large outside diam I froze it and heated the adapter and it would have destroyed the bushing trying to press it in

My box I had for my pioneer bushing is at my shop I'm going grab it. The bushing I was told would work didn't and I'm stuck on the build. Thd bushing I have fits the shaft of the nv3500 but not the bearing adapter. Let me go get my box with the part numb and I'll be back as Arnold says lol...

Does anyone have a link to a pilot BUSHING to replace the magnum needle BEARING I have the adapter steel spacer you need for bearing to fit.

I'm happy to help a fellow jeepster (97 sahara 4.0 all oem ) I'm sure the day is near when I will need your advice (280k on Sarah) cause she is getting long in the tooth and I have a dakota v6 bell housing so I can slip one of my 318 's in her while my wife is asleep cause she won't let me play...

After all the responses to this industry sticking it to the small block mopar AGAIN , I came to the conclusion that B3Racing Engines has this problem beat to death and has explored and worked around the ever so annoying customer with the same question I get asked every day problem . He took a...

I didn't receive it . I stkll had 6 messages before I was full Idk but I did go by ups and I started an argument at the counter one guy said tes just wrap them and another said no have to box them so I hace to go to walmart and find a box for them. Sorry about the delay I have to do this between...

You're reducing the wrong numeric column of numbers in that equation lol.

Did it come with destructions?

All great info thank you . I have used my oem rockers on this motor and when I do the next one I will use trick flow heads with shaft mount they are the better aftermarket design to me. I wasn't willing to let PIE 'S bad business decide any more of my build and just find some chevy man that...

I gave up on the rollers on this motor it's my daily and my inly magnum and PIE stuck it in me with these rollers and I'm not willing to spend anymore wasted money on these take your best guess magnum stud mount problem that just amplifies dodges already stupid lifter pushrod angle. All my other...

Lmao LMAO

It's like this if they will get used I will box them up and bring them to a carrier and if they are a well known member that doesn't own a f-word without the w lol they can pay me when they get them and know what there getting and if they are junk then no problem. I'm willing to box em and send...

Thanks guys but they been kept inside till last week and I have one leg cut off and my left elbow is stuck in one position from surgury and my right hand has nerve damage and won't open completely so me cutting the wrap off the pipes would make my wife horny and I don't know which one of those...

I don't know wat car they fit they came with a motor I bought if someone knows send a post I just dont want them to go to waste $50+

I have to have two drinks in me to do that and i paused drinkin 15yrs ago so I need a bottle before I start posting ????

That was the best link hook up I have ever gotten after reading the tech articles I called him and we were finishing each others sentences lol . After years of research I got more info in the 15 min call THANK YOU!!!