Search results for query: Magnum manifolds

It makes fairly identical hp/tq @ similar rpms as the Mopar 380hp magnum create engine, it's got the basic sbm 400hp package on it. It would of been nice if he also ran it with headers to see how much the manifolds were holding it back. But overall it's just an ok build.

A 2500 converter in a Torqueflite is a stock converter. It'll be a dead dog.

If it was mine, I would get compression in the 9.5 range, run this cam, Magnum Muscle 222/226 Hydraulic Flat Cam for Chrysler 383-440 a good hot ignition curve, some HP manifolds or headers, Eddy RPM intake, 750 DP and hold on. Save the money for the fancy rockers and use it on something else...

that cam wants 3.91 - 4.10 gear, especially with a heavier car.. and 3K+ converter.

Hello everyone, I have a 1966 plymouth barracuda that came with a 273 automatic two barrel. I did a recent build on a 340 and rebuilt my 18 spline automatic as well. I need to go into detail about everthing i did so you can help me with my question so you know what i got. I built this motor to...

Your choice $100 shipped to a US zip. Paypal Both sets are in good shape, no cracks and the flapper still moves on the top set. LA. I here these Magnum manifolds work good for A bodies.

...regarding port sizes and sealing to a magnum head, another bit I can offer into the discussion pool is I just finished firing up my 02 Dakota - it retained its mag 360 and now has an Eddy 7577 and Holley 2bbl Sniper (w/ adapter). To keep things simpler with the exhaust routing and such...

...keep it really retro, a solid lifter cam like a Schneider T132-F, or even a Comp 270S. Short tube headers, if they'll fit in the engine compartment, or large outlet Magnum manifolds if they won't. In a light car like that, a factory high-stall 904 converter should be adequate. Keeping it...

I won’t argue that but then again, I think a re reading of the original post is in order to better answer the actual question asked by the OP. If the question was not, “What can I do cheaply to my current 318”, I’d say your answer is perfect but it’s not along with a bunch of others here making...

just to follow up - I discovered the motor mounts in our 94 Jeep Grand Cherokee utilize the LA bosses and not the magnum bosses, and as such I'm using two of the p-side GC mounts on my 02 magnum 360 (one on each side), which gives me all the room I need to use center dump manifolds - simple and...

Aren't truck 5.9 Magnum manifolds a easy swap with lots of flow? The Offy Dual port may choke your engine. I have a 318 sized one I bought from Summit back in 2000 or so on my '79 360 van. The big port 340/360's were out of production. It worked well with the Comp RV grind and 2200 stall...

back about 15 years ago, I picked up a magnum 318 with a spun main bearing for like $200. I took the original 318 that was in my '85 5th ave that had about 65k miles on it, reringed/bearinged it, had a 5angle VJ done on the magnum engine's heads, home bowl port and gasket matched them, used the...

Plus magnum manifolds will only give 5 hp at best.

Thank you this is great information! On the topic of 273 exhaust manifolds, is there any way to get more flow out of them? That might be the only option as I don't have the money for headers.

Are you at least going to use the larger outlet Magnum manifolds?

Small Block Mopar intake manifolds LA and Magnum- most never used just installed Location: Rio Rancho New Mexico Price is $350 OBO plus shipping or prefer pick up locally

They can be made to fit, but like I said, you have to be willing/able to do fab work to modify them. Remember, these are designed for later ('67 and up) A bodies, the early As are quite a bit more confined. The passenger side fits fine, however the driver's side needs a bit of work. Stock...

good info! I must be missing something obvious as I had slotted the (manual) steering box so I could lower it some & raised the eng all so I could run magnum ex manifolds for much better flow. I will get on it & see if I can take a pic. thanks a bunch! RR

Pair 340-360 Exhaust Manifolds 2 1/4 Outlet. With downpipes Removed from 67 Barracuda w/360. Excellent fit, no leaks. Clears everything $295 plus shipping PayPal or money order accepted Shipping from Boise Idaho 83709 Excellent shape, excellent fit, no rust. Ceramic coated but has flaked in...

I’m not sure. I used to have about 12 or 14 for the LA head alone. Let me think as I type…. Ummmm, for the LA; OEM’s, 1-‘72, 1-‘73, Weiand’s 1 Stealth, 1 Action Plus, Edelbrock’s - RPM X’s 2, 1 dual quad/dual plane, Chink air gaps, 2. (Which are dual patterns.) MoPar - 1 each M1 single...

The blocks are identical PN and dimensions, whether the regular 2 bbl or the 4 bbl Hi-Po version. I think that includes the crank and connecting rods. Only the pistons varied. You can buy special Hi-Po pistons today (Egge?), to give higher compression. The 1964-65 heads have bolt angles ~16...

Your plan sounds pretty good so far save for the cam lift. I think your cam duration could be a little higher for one. I did exactly what you are planning, with some slight differences. My Oregon regrind is 214/224 and .512 lift on 110and sound wise I can barely tell it has anything other than...

Truck LA 360 manifolds can be made to work on the passenger side, but won't fit the driver's side at all, power or manual. Magnum manifolds, same deal. Fit the passenger side but not the driver's side with power steering. I honestly don't know that anything "flows better" than the original (A...

The last 20 years all the American manufacturers have had broken exhaust manifold bolts. My Dakota 3.9 Magnum V6 has a few I need to deal with. When they did their design updates from the LA, SBC and SBF they all came up with the astoundingly brilliant idea to save material on bolt...

63 dart 360/904/7&14 circle track. I am raising the eng/trans so I can run good flowing magnum ex manifolds. what is the max degrees offset I can have on the pinion angle? I know I want them within .5 degrees (iirc) of each other & offset parallel. thank you for your time. RR

I've seen one that was internally balanced. It had the counter weights on the crank cut down a little and the throws turned to run 6.125 SBC Scat rods. It had off the shelf .030 pistons for some kind of SBC. I think it got just a small amount of Mallory metal, but it was smooth as silk when it...

the 63 was never designed for a V8 so there's a little more fiddly-ness to get a V8 and 727 in there. the seam in the firewall with need to get flattened out to fit the 727 bellhousing. along with some massage work on the upper wall near the heater/wiper bump out. you'll need to change out...

Don't some mill some off the manifold flange to gain room ? Angle mill it ? Not sure kind of remember people doing/saying that. I wouldn't do any engine or suspension moving to make it fit, what are we talking power wise an hp or two, I know all the little gains add up, but I wouldn't do...

Well no kidding, I didn't say they would, only that certain magnum manifolds WILL work. I'm not sure what your point is other than you feeling a little jumpy this morning. It's a much more cost effective way to get some "decent" flow on a street car. For what the engine is, they will be loads...

Headers didn't seem to make much of a difference on this combo over manifolds.