Search results for query: *

  • Order by date
  1. jonn6464

    My Trailduster Search Is Over

    Been driving it lately, since it hasn't been so hot in Texas... still need to finish the black paint in the middle of the grill
  2. 67Dart273

    Where do these connectors go?

    Yes. But if you don't have the body manual, download that from there as well. There is some wiring shown in the body manual as well In the chassis manual, get into the schematics area and read all through that. My page no's may not be the same, but some examples. The Dart stuff starts...
  3. Miranthis

    BARRACUDA BACK GLASS GASKET

    that is what is called for by the service manual. You have to use sealant to hold the weatherstrip on the sheet metal before you drop the glass on the seal. Page 23-114 of the 66 service manual.
  4. A56

    1971 Scamp Build Sheet

    What a weird journey. Guy from Tennessee buys it out from others and flips it 5 months later?
  5. Sublime one

    NHL 2024-25

    Not as long as the Hawks season! Hah!
  6. Evan Dutch

    904 Tail Shaft Seal Selection?

    I would’ve preferred the seal with the boot. However, the OD of the seal would’ve been too large for the tail shaft housing bore
  7. Muswagon

    Transmission oil

    Found the updated version of fluid recommendations....
  8. Mopar Tim

    Stop in for a cup of coffee

    Smart
  9. skep419

    Clutch questions (didn't want to hijack other threads)

    First time slip was with the 727 and slicks last year.
  10. hcallaway

    1968 Dodge Dart GT Sleeping Beauty?

    I wanted to see how it will look a little further down the road.
  11. Keith Mopar

    What was the year that the A body cars had this feature?

    Both the 64 and the 65 Barracuda's I had have that style of connector.
  12. ocdart

    IMO - A "Must See" documentary on the V8 engines development, history, and future. Please take a look...

    Very well done! https://www.motortrend.com/videos/3_b0qUwcEg/v8-the-engine-of-america-video/
  13. mbaird

    Duster Breaks FAST Small Block Record

    The FAST class cars are hooking due to suspension setup / weight distribution/ cam grinds that push the power into higher rpms and softer low ends / timing tricks / tire shaving and many tricks I haven’t even thought of . Pretty impressive builds!
  14. Dana67Dart

    904 Tail Shaft Seal Selection?

    My dart's trans was rebuilt in the mid 80s it had a flat rear seal like in the photo post 29. It was leaking so I replaced it with the bellows type. Unfortunately the seal is just long enough that the bellows end touches the up curve of the yoke more than I would like. But at 1000 to 2000...
  15. vocals

    Anyone swap a Tremec T45 in their 67-69 Dart?

    I have a 1969 auto dart and I want to swap it to a 4-Speed or 5-Speed. I found a tremec for a 99-04 mustang and wondered if anyone knows the pain-in-the-*** it might be?? I was going to do the 3-Speed OD swap but also like the idea of the Tremec but they are $5,000! Anyone know the headache a...
  16. retroron

    My Luck

    know them all!
  17. 4spdragtop

    [WANTED] D4B or Offy 273 intake

    Depending on year of 273(66 and newer) will accept the LD4B, which might be easier to find?
  18. Dana67Dart

    WHAT GOES HERE?

    This was a fun one!
  19. 4spdragtop

    2017 Ram ball joints vs complete LCA

    What's the mileage on yours? There's a line of Mevotech that is lifetime(that's my plan). Stealership is 3 yrs(I think). I had planned to do a tire change anyway, but not till spring. Still some tread left after 130 kms, but LOTS of cracking between treads.
  20. C

    [WANTED] 7.25 sure grip WANTED

    Sorry people. The SG unit I have is NOT for a 7 1/4. Just assumed it was as it came with other 7 1/4 and 64 Valiant parts. When I took a good look at it, to make sure it was good, I discovered not 7 1/4. Not sure what it is at this time. Might be 8 1/4?
  21. Professor Fate

    Amp to volt gauge replacement

    It's all okay, guys- lots of similar names DO get confusing after a while!
  22. NoCar340

    Amp to volt gauge replacement

    I will too. I was thinking of Charger Specialties. :BangHead:
  23. 19DART66

    Clutch questions (didn't want to hijack other threads)

    If you take it apart and the pressure plate and flywheel look good (if not have the flywheel turn and a new pp 2600 to 2800#), then throw away the dual friction disc and put an organic disc or a Ram 900 series disc in it, and a Clutch Tamer( follow Grants advise on how to set it up) and go have...
  24. CRUZE 418

    Amp to volt gauge replacement

    Sounds like we have too many companies that start with RT. This is a page from MCG. Don't think that they were in the circuit or electrical side, I don't know. So, it must have been RT something else. Always thought RT Specialties was fasteners, but guess it's more than that. I...
  25. T

    Clutch questions (didn't want to hijack other threads)

    I’m gonna say with those tires it won’t matter much what you do on the clutch side of things and tuning a slick will be all together different. Pick one and focus on that.
  26. T

    Clutch questions (didn't want to hijack other threads)

    @weedburner will have some good input here.
  27. 6

    1971 Scamp Build Sheet

    Well, the guy that got it from NC in that post took it to TN and that is where I got it. Cool guy, has a lot of mopar A body stuff. I drove by and saw the car in his yard for sale, fits what I am trying to do with a car right now and the 8 3/4 is really the ticket to big block 4 speed greatness...
Back
Top