Search results for query: *

Anyone ever use these. There really cheap but if they work good why not. Any opinions Posted via Topify on Android

My transmission rattles a little after shifting into second gear lasts about five seconds then drives normal. What could it be low fluid I've been driving the truck for about a month and a half. Its a slant 6 with a 3 speed. Any idea what it is.

I finally found a transmission for my 440 but not sure how to hook up the throttle valve linkage. The guy I got it from had it rigged up. Here's a few pictures of my carb what do I need to hook the throttle valve up. I know im not supposed to use a bolt. Does anyone else have pictures of how to...

How much do I tourqe the pan bolts on a 727 trans using a rubber gasket and do I use silicone sealant

I'm looking for some info on a a390 Manuel trans. I was looking to make a floor shifter and trying to figure where is 1,2,3 and reverse. The back shifter on the trans won't move at all the one in the front does. Is the rear shifter lever the revers

How much do I torque the bolts on a 904 transmission pan. I'm using a rubber seal.

Not sure what's going on but I just got my car running and just put fresh transmission fluid in and I can't get power out of my car I push the gas and it seems like something is holding me back I have to push down on the petal pretty hard for it to move. Could it possible be the brakes someone...

Im trying to hook up my transmission cooler on a 73 Plymouth 904. Not to sure which where the line on the tranny go which one is the enter and exit hole not use to hooking these up. Thanks

I bought a 318 engine torque converter and 727 transmission. Im trying to put it together to turn it over but when i went to put the torque converter on the transmission it wouldn't fit the transmission was to small. Do i need a smaller torque converter. How do i identify what torque converter i...

hat are the torque specs for the torque converter bolts and flex plate bolts on a 727 thanks for the help

I pretty much have a idea of how to install them i just want to be sure. Its a 318 motor and a 727 tranny and does anyone know where i could get the bolts for the flex plate and torque converter thanks