Search results for query: *

As intelligent as Musk is supposed to be I cannot believe, A: that he is not into hybrids,and B: that he EVER authorized that cyber *uck into production

That part number is NOT supposed to be for oil through pushrod. You keep saying "LA style oil through pushrod provisions" but you must look carefully at the part numbers. Your part number is LA oiling through the head, into the rocker shaft, and then to the rocker arms. There is a different part...

So non of the above. A basic rebuild is all you’ll need to do. No need to do any more oiling mods. The engine doesn’t need it. The heads should just be well prepped and looked at. For more power from the heads, nothing more than a good valve job is needed. No porting. The heads are capable as...

Glad that you got the problem resolved. I thought that was the problem.

WHAT ARE YOU WORKING ON? Model year, etc You have two or three speed wipers? Do you have a service manual?

Wipers, not much help Get into the book, section 8 and read the section on wipers. There is usually a few paragraphs on testing them. I believe the switch must be grounded. They have two power sources, one switched through the ignition switch, and the other live, for "park."

Looking for complete white seat covers for a 65 Cuda. What you got? I couldn't seem to work your website. Thanks.

2 retracting seat belts. Retracting side only. Both work perfectly. Removed from 74'Scamp? Dark green. Could easily be dyed black. $30 plus shipping Located in Bakersfield Ca.

Dome / courtesy. These are all tied together with a common (OEM yellow) negative side, grounding switch leg. That means that when you open a door, twist the light switch, that (OEM yellow) grounds the circuit to activate the lamps. With non OEM wiring you are on your own, unless...

Use the trick flow heads and the Harland Sharp rocker arms for pushrod oiling and any LA intake. Otherwise, there are way to make the LA stuff work on a Magnum block.

Nothing is more annoying than searching the internet for a hour looking for an answer to a problem, and then finding the perfect thread but then the OP never follows up with the solution. So here is the solution to this thread for future surfers that may encounter this same scenario: I changed...

Your question, probably unknown to you, but, is a loaded question. Let me see if this helps in a general fashion. Of course, this general answer may not fit what your thinking since the variables are always moving until a set plan is laid out and executed. The easier an engine breaths the more...

You can as long as it doesn't turn into a sale thread. No offers.

Nice looking Dart.

Hello, I’m going through some stuff I have here and some of the stuff was given to me awhile ago. I don’t remember the exact application for a few things and was hoping you’d help clear it up. First are these pushrods. I have several used LA hydraulic flat tappet pushrods picked from different...

We just paid $2.67 Fuel Center in Kenner, LA - Sam's Club If I did not have property tax, Homeowners insurance, and flood insurance to pay 1st of the year I would buy that car

The headlight switch has TWO power feeds, B1 and B2. One is for only the headlights, the other for park, tail, and instrument. Be sure you have both power sources live. Then check at the dimmer switch. Anytime the light switch is "full on," TWO of the dimmer switch terminals should...

PG Classic.

Just disregard that formula, it has no relevance to what you’re building. The EZ295, SR295, TF270 will all easily support your goals.

$6 per gallon ? Ha ! And we are whining about $3.25 !

What aftermarket blocks are available these days.

4 Spartan horns and 2 Prestolite horns (the larger ones) for sale. All functional. Mounting brackets included. $25 each plus shipping Or $100 plus shipping for all 6. Located in Bakersfield Ca.

I have the floor out of a fastback with 2x3 connectors installed. I’ll post one for you in the morning

If I fly to Mexico to check it out will you provide housing , ceviche and entertainment? Lol Looks like a cool car but buying cross border without seeing the quality of work is scary .

One might even stack all issues of one publication and leave the dates exposed and take a picture

Good thread! I was just about to post a question (still will) but thought it worth chiming in. I am mid way through stripping the external paint off my Valiant. I’ve bare-metal’d vehicles before using twist knot discs on a grinder but this time I didn’t want to create the noise, dust or deal...

I thought we couldn't post what's it worth threads on here?

Question(s)! What size rims? 14 inch? What size rear end? 7-1/4? Thanks for your time. For everyone else, Mexican Spec has always been a straight up no nonsense excellent member who gets my thumbs up. He also makes really nice plastic lights. Example, tail lights, marker lights, etc….

MexSpec has a pretty neat one listed https://www.forabodiesonly.com/mopar/threads/1971-mexican-spec-sharktooth-plymouth-valiant-duster.573106/

My assumption is that it’s not just max HP that counts . Its power delivery that will not blow the tires off but pulls hard into higher rpms . 115 LSAs , high compression, trick timing curves etc…. Then you need to tune the suspension to maximize traction. But because you are limited to...