Search results for query: *

Nice to see you got it out and what an event to kick things off. Congrats on the cool award too. Well deserved!

Slant 6 bars on mine along with 90/10 shocks with the KB alloy hemi. Ride height, drive and ride I’d say is good to impressive.

I run the 30931 pan on mine with an engine plate and stock steering.

:thumbsup:

Thanks very much. Yep it’s a PDN car. I actually put it in a display for my local race track at a recent car show. Only problem with the Dart is that I don’t use it, summer months are busy with racing the old Plymouth. I fab’d up a billet fuel gauge bracket a while back. Fuel line and...

Not sure who the question is for. Myself though with an 8”’converter it’s a good addition for the 572. It’s nicely tucked away, barely visible.

You’ve done a very nice job of the install. A lot of work went into your install.

I thought about the rear but they run cooler up front and the rear was busy anyways. Nice set up though.

I’m not expecting any problems. It’s mounted the same as my B body cooler, which has been in use for coming on 9 years, including close to 400 1/4 mile passes.

I grabbed a couple of pictures for you. The 2 bolts circled secure an aluminum angle on the underside. Then the cooler bracket is bolted to the angle. Looking up from under. 2 pieces of flat aluminum sandwiches the rad support with a bolt that attaches to the lower trans cooler ledge...

That’s serious fast. Must be 1100+ HP. A beautiful 67. I put Stage V black covers on my KB, would like a little more bling though. 3.5” exhaust. I should have went with that, but nooo.. Buddy Daryl showed me his exhaust and I had to have that. Need more bling. 2 mufflers sets off most...

That’s moving it for sure to get that far in short time. A very nice set up. Another nice set of hemi valve covers. Got to get me a set of those. Indy’s?

It’s a fun challenge to get a Hemi into an A body. Although you can use a torque wrench on every header bolt. TTI headers. Can’t do that with a wedge.

My condolences over your loss and also your personal illness. On the bright side you’re getting better and the Hemi is back together, soon to go in.

Thinking wife cannot compete with the magnetism coming off that hemi. Should be shaking the foundation sometime Sunday. Last time I drove it, back in September it was a blast. Stage3 shared a load of info on making these 770’s work and they sure do. But. Driving down the street you have...

Best thing you did was pull it apart and make it right. Or perhaps the very best thing was when you dble checked the weight when the 2nd crank came back. Together and back in place by the weekend? ;) Had mine running today. Sure running terrific after a load of work and changes on the 770’s...

All good upgrades. Are you going to street drive this? If so I’m interested to see how the meziere pump set up works. I also put my limiters where you did. Nice to see it all back together!

yup there’s just somethin bout a Hemi in a Dart

I think that if it were me I’d keep the glass fenders, build the gaps right on them and remove the GT emblems. You could decal the scoop if there’s a hemi under the hood. Just my $.02, it looks good as it is now too, nothing wrong with that healthy wedge neither.

That’s a great car to start with. The hemi is a fun challenge. Right side shock tower rework and master cylinder up and over. Looking froward to following along.

I know one thing. If I had an extra solid cam & lifter set up that was good and I liked it, sure as hell I’d be using it.

Haha. Sometimes a guy needs to take a break. I’d imagine that it’s probably a good thing when a guy can do that. You’ll be back at it soon enough.

Countach, without digging into the thread I assume you mean making a pass with the hood latch and no pins? I’ll make sure i know what you mean before I blah blah blah. I sure like the struts on my Dart though. I’ve installed a set on a buddies A body drag car now too. He loves them, no more...

It’s a crane solid roller, out of their book. Part No#688301.

Now there’s a work of art right there! Thanks for sharing!

The pipes look good on the outside of the rail. I raised my spare tire donut 2” which allowed room to keep the pipes tucked up tight and no visible donut hanging below the bumper.

Yeah you’d have to sneak through between the leaf spring and frame rail to the outside and then turn back towards the rear bumper. My friend has his that way in 4” though, I think he may have had to massage the tank a little to get by. Once I seen his 4” my new 3” came off and I got busy.

Those are 4” DynoMax RaceBullets. Takes a little more bark out of it so instead of setting off most alarms with 2 mufflers, some are set off with 4.

4” out the back

I don’t have the part number, there’s no markings on it but I’ve got a picture. It’s 1/2” thick. The 1250 worked best with 93 main and .028 high speed jets @ 32 degrees. It’s surprising to see what spacers do. This reversion or shear plate worked like a damn on the Barton while a super...